Acura RSX Honda Integra. Manual — part 292
01
S6M6A02E10400013012KBAT10
−
−
−
−
−
−
14-293
ATF Cooler Hose Replacement
A
C
D
B
H
F
D
G
E
2
4 mm
(0.1
0.2 in.)
10
12 mm
(0.4
0.5 in.)
Both sides
5
6 mm
(0.20
0.24 in.)
Both sides
1. Connect the ATF cooler hoses (A) to the ATF filter
(B), with the dot (C) facing up, and secure the hose
ends with the clips (D).
2. Connect the ATF cooler hose (E) to the ATF cooler
(F) with the dot (G) facing down, and to the ATF
cooler lines (H) on the transmission, and secure the
hoses with the clips.
3. Install the clamp on the hoses.
05/06/27 17:57:52 61S6M040_140_0294
01
02
03
S6M6A02E10411412282KAAT00
14-294
Automatic Transmission
Shift Lever Removal
D
B
A
C
E
B
A
1. Remove the center console (see page 20-59).
2. Shift the transmission into the N position.
3. Remove the nut securing the shift cable end, then
separate the cable end from the shift lever.
4. Rotate the socket holder (A) on the shift cable (B) a
quarter turn; the tab (C) on the socket holder will be
in the opening of the shift lever bracket base (D).
Then slide the holder to remove the shift cable
from the shift lever bracket base (D). Do not remove
the shift cable by twisting the shift cable guide (E).
5. Disconnect transmission gear selection switch/park
pin switch connector (A) and shift lock solenoid
connector (B).
6. Remove the shift lever assembly.
05/06/27 17:57:53 61S6M040_140_0295
01
01
S6M6A02E10411412282KCAT00
14-295
Shift Lever Installation
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
B
A
C
C
1. Install the shift lever assembly.
2. Connect transmission gear selection switch/park
pin switch connector (A) and shift lock solenoid
connector (B), and install the harness clamps (C) on
the shift lever bracket base.
3. Turn the ignition switch ON (II), and verify that the
N position indicator comes on.
4. Install the shift cable to the shift lever (see step 5 on
page 14-299). If necessary, adjust the shift cable.
05/06/27 17:57:53 61S6M040_140_0296
01
S6M6A02E10411412282MFAT00
14-296
Automatic Transmission
Shift Lever Disassembly/Reassembly
SHIFT LOCK RELEASE
COVER
A/T GEAR POSITION INDICATOR PANEL
SHIFT LEVER KNOB
8 N·m (0.8 kgf·m, 6 lbf·ft)
SHIFT LEVER COVER
SHIFT LEVER
COVER SLIDER
A/T GEAR POSITION
INDICATOR PANEL
LIGHT BULB
SHIFT LEVER BRACKET BASE
SHIFT LOCK SOLENOID
TRANSMISSION GEAR
SELECTION SWITCH
CONNECTOR BRACKET
PARK PIN SWITCH
CONNECTOR BRACKET
TRANSMISSION GEAR
SELECTION SWITCH/
PARK PIN SWITCH
CONNECTOR
05/06/27 17:57:53 61S6M040_140_0297
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст