Acura RSX Honda Integra. Manual — part 466
01
S6M6A00J46643432301FEAT50
01
S6M6A00J46643430932FEAT50
22-204
22-204
Security Alarm System
Hood Switch Test
Security Hatch Lock Knob Switch
Test
B
A
A
B
1. Open the hood, and disconnect the 2P connector
(A) from the hood switch (B).
2. Check for continuity between the No. 1 and No. 2
terminals.
• There should be continuity when the hood is
opened (lever released).
• There should be no continuity when the hood is
closed (lever pushed down).
3. If the continuity check is not as specified, replace
the switch.
1. Open the hatch, and remove the hatch lower trim
(see page 20-54).
2. Disconnect the 3P connector (A) from the security
hatch lock knob switch (B).
3. Use the driver’s door lock switch to unlock and lock
the hatch, then check for continuity between the
No. 2 and No. 3 terminals.
• There should be continuity when the hatch is
unlocked.
• There should be no continuity when the hatch is
locked.
4. If the continuity check is not as specified, replace
the switch.
Terminal side of
male terminals
05/06/27 18:06:18 61S6M040_220_0205
01
S6M6A00J46643420702FEAT50
01
S6M6A00J46643454311FEAT50
22-205
22-205
Door Key Cylinder Switch Test
Security Horn Test
A
B
1. Remove the door panel (see page 20-5).
2. Disconnect the 3P connector from the key cylinder
switch.
3. Check for continuity between the terminals.
• There should be continuity between the No. 2
and No. 3 terminals when the door key cylinder
switch is in the LOCK position.
• There should be continuity between the No. 1
and No. 2 terminals when the door key cylinder
switch is in the UNLOCK position.
• There should be no continuity between No. 1,
No. 2, and No. 3 terminals when the door key
cylinder switch is in the neutral position.
4. If the continuity is not as specified, replace the
switch.
1. Remove the front bumper.
• ’02-04 models (see page 20-90)
• ’05-06 models (see page 20-91)
2. Disconnect the 1P connector from the horn (under
the right headlight).
3. Test the horn by connecting battery power to the
terminal (A) and grounding the body ground (B).
The horn should sound.
4. If the horn fails to sound, check for a faulty
mounting bolt. If the bolt is OK, replace the horn.
Wire side of
female terminals
05/06/27 18:06:18 61S6M040_220_0206
*01
*02
S6M6A04J46170400000DAAT10
Canada
22-206
Seat Heaters
Component Location Index
SEAT HEATER RELAY
FRONT PASSENGER’S
SEAT CUSHION HEATER
DRIVER’S SEAT CUSHION
HEATER
DRIVER’S/FRONT PASSENGER’S
SEAT HEATER SWITCH
Test, page 22-62
Test, page 22-208
Test, page 22-208
Test/Replacement,
page 22-208
05/06/27 18:06:19 61S6M040_220_0207
*01
S6M6A04J46170400000EAAT10
−
−
−
−
−
−
−
−
Canada
22-207
Circuit Diagram
GRY/BLU
G402
3
2
RED/BLK
No. 14 (30 A)
No. 20 (50 A)
No. 19 (100 A)
UNDER-HOOD FUSE/RELAY BOX
BAT
IG2
IGNITION SWITCH
WHT
BLK/RED
BATTERY
No. 14 (10 A)
WHT/RED
SEAT HEATER SWITCH
9
6
5
10
BLK
BRN
DRIVER’S SEAT HEATER
GRN/ORN
BLU
G501
BLK
G402
BLK
7
GRY/BLU
GRY/BLU
RED/BLK
BLK/YEL
No. 16 (20 A)
GRN/RED
RED
IG2 HOT in ON (II)
TR
BR
BR
TR
BLU
BLK
G501
BRN
DASH LIGHTS
BRIGHTNESS
CONTROLLER
(In the gauge
assembly)
UNDER-DASH
FUSE/RELAY BOX
SEAT
HEATER
RELAY
TAILLIGHT
RELAY
FRONT
PASSENGER’S
SEAT HEATER
SWITCH
DRIVER’S
SEAT HEATER
SWITCH
INDICATOR
LIGHT (0.84 W)
INDICATOR
LIGHT (0.84 W)
FRONT PASSENGER’S
SEAT HEATER
LIGHT
(0.84 W)
BR: BREAKER (OFF 122
129 °F (50
54 °C) )
(ON 86
95 °F (30
35 °C) )
TR: THERMOSTAT (OFF 104
111 °F (40
44 °C) )
(ON 86
95 °F (30
35 °C) )
05/06/27 18:06:20 61S6M040_220_0208
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст