RAM 2500 (2022 year). Manual in english — page 15

236

MULTIMEDIA

Theme Mode

This setting will allow you to adjust the brightness of your theme. Setting

options are “Light”, “Dark” and “Auto”.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Navigation Turn-by-Turn Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be “Off” for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour

format.

Voice Options

This setting will allow you to change the voice options for the radio to “Male”

or “Female”.

“Wake Up” Word

This setting will allow you to set the system “Wake Up” word. The available

options are “Off”, “Hey, Uconnect”, and “Hey, Ram”.

Voice Barge-in

This setting will allow Voice Barge-in to be turned on or off.

Show Command List

This setting will allow the Command List to be shown. The options are “On”

and “Off”.

Key Off Power Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec” and “45 sec”.

Setting Name

Description

MULTIMEDIA

237

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel

This setting will activate the vehicle’s comfort system and heated seats or

heated steering wheel when the vehicle is remote started or ignition is

started. The “Off” setting will not activate the comfort systems. The “Remote

Start” setting will only activate the comfort systems when using Remote Start.

The “All Start” setting will activate the comfort systems whenever the vehicle

is started.

Radio Power Off

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Radio Off With Door

This setting will allow you to determine if the radio shuts off when any of the

doors are opened.

App Drawer Favoriting Popups

This setting will allow you to favorite app drawer pop-ups with “On” and “Off”

options.

App Drawer Unfavoritings Popups

This setting will allow you to unfavorite app drawer pop-ups with “On” and

“Off” options.

New Text Message Popups

This setting will allow you to have pop-up notifications for new text messages.

Setting options are “On” and “Off”.

Missed Calls Message

This setting will allow you to have pop-up notifications for missed calls. Setting

options are “On” and “Off”.

Navigation Popups

This setting will allow you to have pop-up notifications for Navigation. Setting

options are “On” and “Off”.

Setting Name

Description

5

238

MULTIMEDIA

Navigation Settings

This setting will redirect to the list of Navigation settings. Refer to your

Uconnect Owner’s Manual Supplement for further information.

Audio Settings

This setting will open the submenu, containing the audio settings

Ú

page 250.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Restore Settings to Default

This setting will return all the previously changed settings to their factory

default.

Trip B

This setting will turn the Trip B feature in the cluster on or off.

Audio Info On Cluster

This setting will turn the audio info on the cluster on or off.

Digital Speed On All Cluster Screens

This setting will show the digital speedometer on all cluster screens.

Consumption Bar On Cluster Screen

This setting will show the digital fuel consumption bar on all cluster screens.

Custom Areas On Cluster

This setting will allow you to customize the information displayed on the

cluster.

Audio Repetition

This setting will turn the system audio repetition on or off.

More Profile Options

This setting will give access to more profile options.

Setting Name

Description

MULTIMEDIA

239

Safety/Driving Assistance

When the Safety/Driving Assistance button is selected on the touchscreen, the system displays the options related to the vehicle’s safety settings. These

options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a

subfolder, select the desired folder; the available options related to that feature will then display on the screen.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Forward Collision Warning Sensitivity — Located In Automatic Emergency

Braking Submenu

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Forward Collision Warning — Located In Automatic Emergency Braking

Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off”

setting will deactivate the FCW system. The “Warning Only” setting will provide

only an audible chime when a collision is detected. The “Warning + Active

Braking” setting will provide an audible chime and apply some brake pressure

when a collision is detected.

LaneSense Warning — Located In LaneSense Submenu

This setting will change the distance at which the steering wheel will provide

lane departure feedback. The available settings are “Early”, “Medium”, and

“Late”.

LaneSense Strength — Located In LaneSense Submenu

This setting will change the strength of the steering wheel feedback during a

lane departure. The available settings are “Low”, “Medium”, and “High”.

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected and provide both an audible chime and a visual display.

5

240

MULTIMEDIA

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected

in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The

“Lights” setting will activate the Blind Spot Alert lights on the outside mirrors.

The “Lights & Chime” setting will activate both the lights on the outside

mirrors and an audible chime.

Trailer Length For Blind Spot Alert

This setting will auto detect the length of an attached trailer. The “Auto”

setting will have the system automatically set the trailer length. The “Max”

setting will always set the length to the maximum 39.5 ft (12 m).

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when

shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

ParkView Backup Camera Fixed Guidelines

This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.

Tire Fill Assist

This setting will turn Tire Fill Assist on or off.

Power Side Steps

This setting will raise and lower or stow the Power Side Steps. The available

options are “Automatic” to raise and lower the Power Side Steps and “Stow” to

deactivate the Power Side Steps.

Setting Name

Description

MULTIMEDIA

241

Clock & Date

When the Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system

will control the time via the GPS location.

Set Time

This setting will allow you to set the hours and minutes. Sync Time With GPS

must be off for this setting to be available. The “+” setting will increase the

hours or minutes. The “-” setting will decrease the hours or minutes.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be off for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour

format.

Set Date

This setting will allow you to set the day, month and year. Using “+” or “-”, you

can scroll through the available days, months, and years.

Show Time in Status Bar

This setting will place the time in the radio’s status bar.

Show Time and Date During Screen Off

This setting will allow you to show the time and date while the screen is off.

Available options are “On” and “Off”.

5

242

MULTIMEDIA

Phone/Bluetooth®

Voice

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio

device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Device Manager

This setting will open the Device Manager main screen.

Do Not Disturb All

This setting will open the Do Not Disturb All settings menu. The available

options are “On” and “Off”.

Enable Two Active Phones

This setting will enable or disable two active phones within the vehicle. The

setting options are “On” and “Off”.

Phone Pop-Ups Displayed In Cluster

This setting will activate phone message pop-ups in the Instrument Cluster

Display.

When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Voice Options

This setting will allow you to change the system’s voice to either “Male” or

“Female”.

Wake Up Word

This setting will allow you to set the system’s “Wake Up” word. The available

options are “Off”, “Hey, Uconnect”, and “Hey, Ram”.

MULTIMEDIA

243

Navigation — If Equipped

Trailer Brake/Trailer — If Equipped

Voice Barge-In

This setting allows you to respond to a Voice Response before the statement

is completed by the system. The available options are “On” and “Off”.

Show Command List

This setting will allow you to turn the Command List on or off. The “Always”

setting will always show the Command List. The “With Help” setting will show

the Command List and provide a brief description of what the command does.

The “Never” setting will turn the Command List off.

Setting Name

Description

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can

change which icons display on the map, how “time to arrival is calculated”, and route types.
For more information on Navigation and settings, refer to your Uconnect Owner’s Manual Supplement.

When the Trailer Brake/Trailer button is pressed on the touchscreen, the system will display settings related to trailer towing.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Trailer 1

Options for each Trailer are “Use This Trailer”, “Braking” (Light Electric, Heavy

Electric, Light Electric over Hydraulic, and Heavy Electric over Hydraulic),

“Trailer Name”, and “Tire Pressure” (Setup All Tires, Replace Single Tire, Set

Target Tire Pressure, Delete Tire Settings).

Trailer 2

Options for each Trailer are “Use This Trailer”, “Braking” (Light Electric, Heavy

Electric, Light Electric over Hydraulic, and Heavy Electric over Hydraulic),

“Trailer Name”, and “Tire Pressure” (Setup All Tires, Replace Single Tire, Set

Target Tire Pressure, Delete Tire Settings).

5

244

MULTIMEDIA

Trailer 3

Options for each Trailer are “Use This Trailer”, “Braking” (Light Electric, Heavy

Electric, Light Electric over Hydraulic, and Heavy Electric over Hydraulic),

“Trailer Name”, and “Tire Pressure” (Setup All Tires, Replace Single Tire, Set

Target Tire Pressure, Delete Tire Settings).

Trailer 4

Options for each Trailer are “Use This Trailer”, “Braking” (Light Electric, Heavy

Electric, Light Electric over Hydraulic, Heavy Electric over Hydraulic), “Trailer

Name”, and “Tire Pressure” (Setup All Tires, Replace Single Tire, Set Target

Tire Pressure, Delete Tire Settings).

Trailer Surround Camera

This setting will let you access options related to the “Trailer Surround

Camera”.

Trailer Select

Select from “Trailer 1”, “Trailer 2”, “Trailer 3”, and “Trailer 4”. These trailer

designations can be used to save different trailer settings.

Trailer Brake Type

This setting will set the system to a specific trailer type. The available options

are “Light Electric”, “Heavy Electric”, “Light Electric-Over-Hydraulic”, and

“Heavy Electric-Over-Hydraulic”.

Trailer Name

This setting will personalize the trailer name depending on the type of trailer

you are hauling. Select the trailer name from the following list: trailer, boat,

car, cargo, dump, equipment, flatbed, gooseneck, horse, livestock,

motorcycle, snowmobile, travel, utility, and 5th wheel.

Setting Name

Description

MULTIMEDIA

245

Camera

Mirrors & Wipers

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Surround View Camera Delay

This setting will add a timed delay to the Surround View Camera when shifting

out of REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when

shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

ParkView Backup Camera Fixed Guidelines

This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the ON/

RUN position and the transmission gear selector is in the REVERSE position.

The mirrors will move back to their previous position when the transmission is

shifted out of REVERSE. The available settings are “On” and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated.

5

246

MULTIMEDIA

Lights

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.

NOTE:

When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of

the vehicle purchased.

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is turned off. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is unlocked. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

Headlights with Wipers

This setting will turn the headlights on when the wipers are activated.

Daytime Running Lights

This setting will allow you to turn the Daytime Running Lights on or off.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock

button is pushed on the key fob on or off.

Auto Dim High Beams

This setting will allow you to turn the Auto Dim High Beams on or off.

Steering Directed Lights

This setting will turn the headlights with the steering wheel. The available

options are “On” and “Off”.

MULTIMEDIA

247

Brakes

Doors & Locks

After pressing the Brakes button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Park Brake

This setting will turn the Auto Park Brake on or off.

Brake Service

This setting will allow you to retract the brakes for servicing.

When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Door Locks

This setting will allow you to change if the doors lock automatically when the

vehicle reaches 12 mph (19 km/h).

Auto Unlock On Exit

This setting will unlock the doors when any of the doors are opened from the

inside.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock

button is pushed on the key fob on or off.

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key

fob. The “Off” setting will not sound the horn when the Lock button is pushed.

The “1st Press” setting will sound the horn when the Lock button is pushed

once. The “2nd Press” setting will sound the horn when the Lock button is

pushed twice.

5

248

MULTIMEDIA

Seats & Comfort/Auto-On Comfort Systems

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the

key fob.

Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks

This setting will change how many pushes of the Unlock button on the key fob

are needed to unlock all the doors. The “Driver Door” setting will only unlock

the driver door on the first push on the Unlock button. The “All Doors” setting

will unlock all doors with only one push of the Unlock button.

Passive Entry

This setting will allow you to turn the Passive Entry feature (Keyless

Enter ‘n Go™) on or off.

Personal Settings Linked To Key Fob

This setting will recall preset radio stations and driver seat position that have

been linked to the key fob.

When the Seats & Comfort/Auto-On Comfort Systems button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort

systems when remote start has been activated or the vehicle has been started.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle

Start

This setting will activate the vehicle’s comfort systems and heated seats or

heated steering wheel when the vehicle is remote started or ignition is started.

The “Off” setting will not activate the comfort systems. The “Remote Start”

setting will only activate the comfort systems when using Remote Start. The “All

Start” setting will activate the comfort systems whenever the vehicle is started.

Easy Exit Seats

This setting will automatically move the driver seat rearward when the engine

is shut off. The available settings are “On” and “Off”.

Setting Name

Description

MULTIMEDIA

249

Key Off Options/Engine Off Options

Suspension/Air Suspension

When the Key Off Options/Engine Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings

will only activate when the ignition is set to OFF.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Easy Exit Seat

This setting adjusts the seats to make exiting the vehicle easier.

Key Off Power Delay/Engine Off Power Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Headlight Off Delay

This setting will allow you to set the amount of time the headlights remain on

after the vehicle has been turned off. The “+” will increase the amount of

time. The “-” will decrease the amount of time.

When the Suspension/Air Suspension button is pressed on the touchscreen, the system will display settings related to the vehicle’s air suspension.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Display Suspension Messages

This setting will display suspension messages in the Instrument Cluster

Display. The “All” setting will display all available messages. The “Warnings

Only” setting will only display warning messages.

Tire Jack Mode

This setting will disable the air suspension system to assist in changing a

spare tire.

5

250

MULTIMEDIA

Audio

Transport Mode

This setting will disable the air suspension system for flat towing.

Wheel Alignment Mode

This setting must be activated before performing a wheel alignment. Contact

an authorized dealer for further information.

Setting Name

Description

When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio

location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Balance/Fade — Located In the Audio Settings Submenu

This setting will adjust audio levels from specific speakers in the front/back

and left/right of the vehicle. The Speaker icon can be moved to set audio

location.

Equalizer — Located In the Audio Settings Submenu

This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio.

Speed Adjusted Volume — Located In the Audio Settings Submenu

This setting will adjust audio volume as speeds increase. At a higher setting,

the volume will increase more as the vehicle speeds up. The available settings

are “Off”, “1”, “2”, and “3”.

Surround Sound — Located In the Audio Settings Submenu

This setting will turn the Surround Sound system on or off.

AUX Volume Offset — Located In the Audio Settings Submenu

This setting will tune the audio levels from a device connected through the

AUX port. The available settings are “+” and “-”.

Auto Play — Located In the Audio Settings Submenu

This setting will automatically begin playing audio from a connected device.

MULTIMEDIA

251

Notifications

Auto-On Radio — Located In the Audio Settings Submenu

This setting will automatically turn the radio on when the vehicle is started.

The available settings are “Off”, “On”, and “Recall Last”. With Recall Last, the

system resumes the previous task before vehicle shut off.

Volume Adjustment — Located In the Audio Settings Submenu

This setting will allow you to set the audio volume levels for each option

(Media, Phone, Navigation, etc.). You can set the volume between 0 and 38.

Loudness — Located In the Audio Settings Submenu

This setting will improve audio quality at lower volumes.

Setting Name

Description

When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Notification Sounds

This setting will turn off the Notification chime that plays when a new

notification is sent. The options are “On” and “Off”.

App Drawer Favoriting Popups

This setting turns the App Favorited pop-up on or off.

App Drawer Unfavoriting Popups

This setting turns the App Unfavorited pop-up on or off.

New Text Message Popups

This setting turns receiving/storing a pop-up for new text messages of any

connected phone on or off.

Missed Calls Message

This setting turns receiving/storing a pop-up for missed calls of any connected

phone on or off.

Navigation Popups

This setting turns receiving/storing predictive Navigation Pop-Ups on or off.

5