Acura TL (2014 year). Manual — part 27
Press and release the HFL Talk
button before a command.
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Say ‘‘
’’ after the prompts.
Say the name you want to delete
and follow the HFL prompts to
complete the deletion.
Say ‘‘
.’’
Say ‘‘
’’ after the prompts.
HFL begins reading the names in
the order they were stored.
If you hear a name you want to call,
immediately press the HFL Talk
button and say ‘‘
.’’
Press and release the HFL Talk
button before a command.
Follow the HFL prompts, select a
number from your cell phone, and
send it to HFL.
Say ‘‘
’’ after the
prompts.
Say ‘‘
.’’
Follow the HFL prompts and
name the number, or say
‘‘
’’ if it is not the number
you want to store.
Follow the HFL prompts if you
want to store another number.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
5.
Phonebook
Delete
Phonebook
List
Call
Receive contact
Phonebook
Discard
To delete a name:
To list all names in the phonebook:
To store a specif ic phone number
f rom your cell phone directly to the
HFL phonebook (available on some
phones):
Bluetooth
HandsFreeLink (Models without navigation system)
Fe
a
tu
re
s
419
12/07/20 11:24:09 31TK4640_424
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This command group allows you to
change or customize HFL basic
settings.
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Once a passcode is set, you
will need to enter it to use HFL each
time you start the vehicle. If you
forget the code, your dealer will have
to reset it for you, or you will have to
clear the entire system (see page
).
Follow the HFL prompts to
confirm the number.
Follow the HFL prompts and say
the 4-digit passcode you want to
set.
Say ‘‘
’’ after the prompts.
1.
2.
3.
4.
422
System Setup
System setup
Security
To set a 4-digit passcode to lock the
HFL system f or security purposes:
Bluetooth
HandsFreeLink (Models without navigation system)
420
NOTE:
12/07/20 11:24:17 31TK4640_425
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
If you get into the vehicle while you
are on the phone, the call can be
automatically transferred to HFL
with the ignition switch in the
ACCESSORY (I) or ON (II) position.
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Follow the HFL prompts to
confirm the number.
Follow the HFL prompts and say
the new 4-digit passcode.
Say ‘‘
’’ after the
prompts.
The default setting is a ring tone.
Follow the HFL prompts and say
‘‘
’’ or ‘‘
.’’ You
can also say ‘‘
’’ for no audible
incoming call notification.
Say ‘‘
’’ after the
prompts.
HFL will let you know if auto
transfer is on or off, depending on
the previous setting. Follow the
HFL prompts to change the
setting.
Say ‘‘
’’ after the
prompts.
2.
3.
4.
1.
2.
3.
1.
2.
3.
1.
:
CONTINUED
System setup
System setup
System setup
Change passcode
Ring tone
Prompt
Of f
Call notif ication
Auto transf er
To change your security passcode:
To select either a ring tone or a
prompt as the incoming call
notif ication :
To activate or deactivate the auto
transf er f unction:
Bluetooth
HandsFreeLink (Models without navigation system)
Fe
a
tu
re
s
421
12/07/20 11:24:29 31TK4640_426
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Press and release the HFL Talk
button before a command.
Follow the HFL prompts.
Say the language you want to
change to in that language.
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Follow the HFL prompts to
change the language to English or
French.
When French is your currently
selected language, you can give voice
commands in French.
If you have not named your paired
phone in the language you just
selected, HFL will ask you to name it
in the current language.
This operation clears the passcodes,
paired phones, and all names in the
HFL phonebook.
Press and release the HFL Talk
button before a command.
Say ‘‘
.’’
Say ‘‘
’’ after the prompts.
Follow the HFL prompts to
continue to complete the clearing
procedure.
You can also clear the system when
you have forgotten the passcode and
cannot access HFL. When HFL asks
you for the passcode, say ‘‘
.’’ Paired phones, and all names
in the HFL phonebook will be lost.
1.
2.
3.
2.
1.
1.
2.
Canadian models only
Canadian models only
To clear the system:
To quickly change the language:
To change the system language
between English and French:
Quick Language Selection
Change Language
Change language
System setup
Clear
System
clear
Bluetooth
HandsFreeLink (Models without navigation system)
422
12/07/20 11:24:43 31TK4640_427
-------------------------------------------------------------------------------------------------------------------------------------------------------------
An incoming call on HFL will
interrupt
Audio when it is
playing. Audio will resume when the
call is ended.
The
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of
such marks by Honda Motor Co.,
Ltd. is under license. Other
trademarks and trade names are
those of their respective owners.
This device complies with the
appropriate requirements or the
required standards. See page
for
more information.
628
Bluetooth
Bluetooth
Bluetooth
Wireless Technology
HFL Limitations
Bluetooth
HandsFreeLink (Models without navigation system)
Fe
a
tu
re
s
423
12/07/20 11:24:49 31TK4640_428
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Bluetooth
www.acura.com/
handsfreelink
www.handsfreelink.ca,
When a phone has never been paired to
the system:
HandsFreeLink (HFL)
allows you to place and receive
phone calls using either the
navigation system controls or voice
commands without the distraction of
handling your cell phone.
In the U.S., visit
, or call (888) 528-7876.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special feature
capabilities:
Use the Interface Dial to make menu
or list selections.
To select an item on the screen, turn
the interface dial left or right to
highlight it, and then press ENTER.
To select an item that comes with
,
,
, or
icons,
push the interface selector up, down,
left, or right.
In Canada, visit
or call (888) 528-7876.
Press the PHONE button or PICK-
UP button to enter the phone pairing
procedure (see page
).
432
Using HFL
Bluetooth
HandsFreeLink (Models with navigation system)
Interf ace Dial
424
INFO BUTTON
SELECTOR
DIAL
ENTER
CANCEL
BUTTON
PHONE BUTTON
12/07/20 11:24:59 31TK4640_429
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
CONTINUED
Press and
release to answer a call, or press to
go directly to the Cellular Phone
screen.
Press and
release to end or decline a call.
Press the INFO button to go to the
main information screen to select the
Cellular Phone menu.
Press the PHONE button or PICK-
UP button to go to the Cellular
Phone screen.
Press the CANCEL button to go
back to the previous screen.
When there is a paired phone is in your
vehicle:
Bluetooth
HandsFreeLink (Models with navigation system)
HFL Buttons
PICK-UP Button
HANG-UP Button
Fe
a
tu
re
s
425
PICK-UP BUTTON
HANG-UP
BUTTON
BACK BUTTON
U.S. model is shown.
TALK
BUTTON
12/07/20 11:25:09 31TK4640_430
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls.
Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted.
For help at any time, including a list
of available options, say ‘‘Help.’’
Refer to the navigation system
manual for how to change the
system’s language between English,
French, and Spanish.
Press and release the Talk button
each time you want to make a
command. After the beep, speak in
a clear, natural tone.
Air or wind noise from the
dashboard and side vents,
windows and moonroof may
interfere with the microphone.
Adjust or close them as necessary.
Press and release
to give a command.
When the Cellular Phone screen is
displayed, pressing the TALK button
guides you through all available
functions.
Press and release
to go back to the previous command,
or cancel the command.
Help Feature
Language Selection
Voice Control Tips
Bluetooth
HandsFreeLink (Models with navigation system)
TALK Button
BACK Button
426
MICROPHONE
12/07/20 11:25:18 31TK4640_431
-------------------------------------------------------------------------------------------------------------------------------------------------------------
As an incoming call notification, you
will see the following display:
Some phones may send battery,
signal strength, and roaming status
information to HFL.
To answer the call and show the
HFL information, press the PICK-UP
button on the steering wheel.
HFL Display
Bluetooth
HandsFreeLink (Models with navigation system)
Fe
a
tu
re
s
427
CALLER NAME
PHONE DIALING
BATTERY LEVEL
STATUS
SIGNAL STRENGTH
LENGTH OF CALL TIME
ROAM STATUS
BLUETOOTH INDICATOR
When the audio is in use.
U.S. model is shown.
12/07/20 11:25:26 31TK4640_432
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Bluetooth
HandsFreeLink (Models with navigation system)
How to Use HFL
428
Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the
Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel.
Press and release the Talk button each time you give a command.
All
Dial
Receive
Missed
Call History
More
Speed Dial
The power mode must be in ACCESSORY or ON (see page
).
Dial
Phone Book
Redial
Cellular
Phone
(see page 444).
(see page 446).
Display the paired phone’s previously imported phonebook (or import a new one)
Displays a list of all 20 speed dial entries. The first 4 speed dial numbers are shown on the
Cellular Phone screen (see page 446).
Push and hold the interface selector (ENTER) to redial the last number called by HFL
184
Display the last 20 incoming, outgoing, or missed calls (see page 445).
(Appears only when a phone is connected to the system via HFL.)
(see page 445).
Display the last 20 outgoing calls
(Appears only when a phone is connected to the system via HFL.)
(see page 445).
Display the last 20 incoming calls
(Appears only when a phone is connected to the system via HFL.)
(see page 445).
Display the last 20 missed calls
(Appears only when a phone is connected to the system via HFL.)
Enter a phone number to dial (see page 445).
12/08/03 20:58:38 31TK4640_433
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CONTINUED
Bluetooth
HandsFreeLink (Models with navigation system)
Fe
a
tu
re
s
429
Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the
Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel.
Press and release the Talk button each time you give a command.
Add New Phone
Connect
Disconnect
Delete
Store Voice Tag
Delete
Speed Dial
Store
Speed Dial
Delete Voice Tag
Pass-key
Connection
Phone
Setup
Edit
Speed Dial
Cellular
Phone
Connect a paired phone to the system
Disconnect a paired phone from the system
Pair a phone to the system
Delete a previously paired phone
Delete a previously stored speed dial number
(see page 436).
(see page 435).
(see page 432).
(see page 436).
Create a Pass-key number for a paired phone (see page 435).
(see page 444).
(see page 443).
(see page 443).
Select a number from the Call History, Phone Book, or manual
entry to store as a speed dial number (see page 442).
Delete a voice tag for a speed dial number
Create a voice tag for a speed dial number
12/08/03 20:58:45 31TK4640_434
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Bluetooth
HandsFreeLink (Models with navigation system)
430
Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the
Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel.
Press and release the Talk button each time you give a command.
Auto Answer
Auto Transfer
Phone
Setup
Edit Phone
Name/PIN
Cellular
Phone
Clear Cellular
Phone
Information
(see page 439).
(see page 439).
Create a phone name/PIN number for a paired phone
Set calls to automatically transfer from your phone to HFL when you enter the vehicle
Set incoming calls to be automatically answered
Clear the system of all paired phones, phonebook entries, speed dials, and pass-keys
(see page 437).
(see page 439).
12/08/03 20:58:49 31TK4640_435
-------------------------------------------------------------------------------------------------------------------------------------------------------------
To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
HFL uses a Class 2 Bluetooth, which
means, the maximum range between
your phone and vehicle is 30 feet (10
meters).
Press the PHONE button or PICK-
UP button to go to the Cellular
Phone screen.
Select ‘‘PHONE SETUP’’ from the
Cellular Phone screen.
You can set up your phone and other
system options with this menu.
CONTINUED
Phone Setup
Cellular Phone
Bluetooth
HandsFreeLink (Models with navigation system)
Fe
a
tu
re
s
431
Push the selector down for
PHONE SETUP.
12/07/20 11:25:48 31TK4640_436
-------------------------------------------------------------------------------------------------------------------------------------------------------------
To pair a cell phone (when there is no
phone paired to the system):
Press the PHONE button or PICK-
UP button. The system starts pairing
when there is no phone paired to the
system.
Press the PHONE button or PICK-
UP button. The system prompts
you to pair a phone. Select ‘‘Yes’’
on the confirmation screen.
Make sure your phone is set to
discoverable or visibility is ON,
and select ‘‘OK.’’ HFL begins to
search for your phone.
1.
2.
Setup Bluetooth Phone
Bluetooth
HandsFreeLink (Models with navigation system)
432
12/07/20 11:25:55 31TK4640_437
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HFL gives you a 4-digit pass-key
that you will need to input on your
phone.
When your phone prompts you,
input the 4-digit pass-key.
You will receive a notification on
the screen and your phone if
pairing is successful.
If your phone doesn’t appear on
the list, select ‘‘Phone not found?’’
and search for Bluetooth devices
using your phone. From your
phone, select ‘‘HandsFreeLink.’’
If your phone is found, it is
displayed on the screen. Select it
and press ENTER.
You will receive a notification to set
up an AcuraLink connection. If you
want to do this, please see page
,
or select ‘‘Setup Later.’’
5.
3.
4.
6.
7.
449
On U.S. models
CONTINUED
Bluetooth
HandsFreeLink (Models with navigation system)
Fe
a
tu
re
s
433
U.S. model is shown.
12/07/20 11:26:04 31TK4640_438
-------------------------------------------------------------------------------------------------------------------------------------------------------------
You cannot pair your phone while
the vehicle is moving.
Up to six phones can be paired.
Your phone’s battery may drain
faster when it is paired to HFL.
Select ‘‘PHONE SETUP’’ from the
Cellular Phone screen.
Select ‘‘Connection’’ from the
Phone Setup screen.
Select ‘‘Add New Phone.’’
Follow steps 2 through 7 from the
previous page.
1.
2.
4.
3.
To pair a cell phone (when there are one
or more phones paired to the system):
Phone pairing tips
Bluetooth
HandsFreeLink (Models with navigation system)
434
12/08/08 20:02:58 31TK4640_439
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст