Acura TL (2014 year). Manual — part 6
This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it. There
are two trip meters: Trip A and Trip
B. Each trip meter works
independently, so you can keep track
of two different distances.
In the customizing mode, you can set
Trip A and average fuel economy A
to reset when you refuel your vehicle
(see page
).
To reset a trip meter, display it, and
then press and hold the SEL/RESET
button until the number resets to
‘‘0.0.’’
When you reset Trip A, average fuel
economy A is reset at the same time.
When you reset Trip B, average fuel
economy B is reset.
105
Multi-Information Display
Trip Meter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
83
TRIP METER A
U.S.
Canada
TRIP METER B
12/08/03 20:55:00 31TK4640_088
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This shows your instant fuel
economy.
This shows your vehicle’s average
fuel economy in mpg (U.S. models)
or liter/100 km (Canadian models)
since you last reset Trip A or Trip B.
You can customize the Trip A and
Average Fuel Economy A reset
condition on the multi-information
display (see page
).
Along with the trip meter, the trip
computer calculates these values:
Average Fuel Economy
Instant Fuel Economy
Range
Elapsed Time
Average Vehicle Speed
105
Multi-Information Display
INSTANT FUEL MPG (U.S.
models)/INSTANT FUEL L/100 km
(Canadian models)
Average Fuel Economy A/B
Trip Computer
84
U.S. model is shown.
INSTANT FUEL
AVERAGE FUEL
ECONOMY A
12/08/03 20:55:10 31TK4640_089
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
This shows the estimated distance
you can travel on the fuel remaining
in the fuel tank. This distance is
estimated from the fuel economy
you received over the last several
miles (U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traffic, etc.
This shows the accumulated
traveling time since you last reset it.
When you turn the ignition switch
to the ON (II) position, ELAPSED
TIME is reset.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
and
.
You can customize the ELAPSED
TIME reset conditions on the multi-
information display (see page
).
This shows the average speed you
are traveling in miles per hour (mph)
for U.S. models or kilometers per
hour (km/h) for Canadian models.
:
187
184
106
Multi-Information Display
RANGE
ELAPSED TIME
AVG. SPEED
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
85
12/08/03 20:55:17 31TK4640_090
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This shows the outside Fahrenheit
temperature in U.S. models, and
Celsius temperature in Canadian
models.
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
You can adjust the outside
temperature display (see page
).
The temperature sensor is in the
front bumper. The temperature
reading can be affected by heat
reflection from the road surface,
engine heat, and the exhaust from
surrounding traffic. This can cause
an incorrect temperature reading
when your vehicle speed is under
19 mph (30 km/h). When you start
your trip, the sensor is not fully
acclimatized, therefore it may take
several minutes until the proper
temperature is displayed.
This shows the remaining engine oil
life. It shows 100% after the engine
oil is replaced and the display is reset.
The engine oil life is calculated
based on engine operating conditions.
For more information, see page
.
104
531
Outside Temperature
Engine Oil Lif e
Multi-Information Display
86
OUTSIDE TEMPERATURE
ENGINE OIL LIFE
U.S.
U.S. model is shown.
Canada
12/08/03 20:55:25 31TK4640_091
-------------------------------------------------------------------------------------------------------------------------------------------------------------
You can see the pressure of each tire
in this monitor. If one or more tires
are low, inflate them to the correct
pressure. For more information, see
page
.
This monitor shows how much
torque is being delivered to each
wheel. For more information, see
page
.
515
504
SH-AWD models only
Tire Pressure Monitor
SH-AWD Torque Distribution
Monitor
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
87
U.S.
Canada
U.S. model is shown.
Example:
Example:
Technology Package is
shown.
Technology Package is
shown.
12/08/03 20:55:32 31TK4640_092
-------------------------------------------------------------------------------------------------------------------------------------------------------------
You can receive or make phone calls
from your cell phone through your
vehicle’s
HandsFreeLink
(HFL) system without touching your
cell phone.
To use the system, your cell phone
and the HFL system must be linked.
Not all cell phones are compatible
with this system. Refer to page
for instructions on how to link
your cell phone to HFL and how to
receive or make phone calls, or visit
the acura.com/handsfreelink
website. In Canada, visit
, or call (888) 528-
7876.
You can see HFL information on the
navigation screen (see page
).
412
427
Bluetooth
On models without navigation system
www.
handsfreelink.ca
On models with navigation system
Multi-Information Display
Bluetooth
HandsFreeLink
88
U.S. model is shown.
12/08/03 20:55:38 31TK4640_093
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
▲ ▼
▲ ▼
If there is a problem with your
vehicle, for example the engine oil
level is low or a door is not fully
closed, the multi-information display
will show you the problem. It does
this by interrupting the current
display with one or more messages.
The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go off until the problem(s)
is corrected.
You will also hear a beep when the
system message comes on for the
first time.
Most of the messages are displayed
for about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To switch the message(s) before 5
seconds have elapsed, press the
INFO (
/
) button on the steering
wheel.
Even if you press the INFO (
/
)
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
If the system message indicator
remains lit on the instrument panel,
you can see the corresponding
message(s) again by pressing the
INFO (
/
) button repeatedly.
On the next page is a list of all
messages:
CONTINUED
System Messages
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
89
A/T model is shown.
SYSTEM MESSAGE INDICATOR
12/07/20 10:41:04 31TK4640_094
-------------------------------------------------------------------------------------------------------------------------------------------------------------
See page
33
See page
20
See page
20
See page
33
See page
12
See page
212
See page
553
See page
598
See page
596
See page
597
See page
595
See page
508
See page
510
See page
510
Multi-Information Display
90
U.S.
Canada
U.S.
Canada
Canada
U.S.
Canada
U.S.
SH-AWD model only
12/07/20 10:41:16 31TK4640_095
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CONTINUED
See page
70
See page 488
See page 490
See pages
75 and 526
See pages
75 and 526
See page
77
See page
142
See page
516
See page
517
See page
516
See page
517
See page
515
See page
494
See page
577
See page
73
See page
505
See page
505
On models without
keyless access
system
On models with
keyless access
system
A/T model
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
91
U.S. model shown
U.S. model shown
U.S.
Canada
SH-AWD model only
SH-AWD model only
12/08/03 20:55:52 31TK4640_096
-------------------------------------------------------------------------------------------------------------------------------------------------------------
See page
196
See page
196
See page
193
See page
194
See page
198
See page
471
See page
548
See page
151
See page
532
See page
533
See page
534
Multi-Information Display
On models with keyless access
system
92
On models without
keyless access system
Canadian models only
12/08/03 20:56:01 31TK4640_097
-------------------------------------------------------------------------------------------------------------------------------------------------------------
See page
189
See page
188
See page
191
See page
200
See page
199
See page
188
See page
190
See page
191
See page
188
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
93
A/T model only
A/T model only
A/T model only
M/T model only
12/07/20 10:41:51 31TK4640_098
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
*
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park (automatic) or
with the parking brake set (manual).
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFT TO PARK TO CHANGE
SETTINGS’’ (automatic) or ‘‘MUST
STOP AND SET PARK BRAKE TO
CHANGE SETTINGS’’ (manual)
message and you cannot change the
settings.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately.
To have the driver’s ID detected,
make sure the driver’s door is
unlocked with a corresponding
remote transmitter/keyless access
remote.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages
and
.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, move the shift lever out of
Park (automatic) or release the
parking brake (manual), the display
will change to the normal screen.
:
187
184
Multi-Information Display
Customized Settings
94
12/07/20 10:41:58 31TK4640_099
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
Refer to the table on the following
pages about the settings you want to
customize.
If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
To enter the customizing mode,
press either INFO button (
/
)
repeatedly until ‘‘CUSTOMIZE
SETTINGS’’ is displayed, then press
the SEL/RESET button.
CONTINUED
On models without keyless access
system
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
95
DRIVER’S ID
Press the SEL/RESET
button.
U.S. model is shown.
12/07/20 10:42:03 31TK4640_100
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
*
*
*
*
*
*
*
*
−
∼ ±
∼
−
∼ ±
∼
*
*
LOW
MIN
OFF
METER SETUP
(P.101)
POSITION SETUP
(P.112)
LANGUAGE SELECTION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A RESET
WITH REFUEL
ELAPSED TIME
RESET
ADJUST
ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START
GUIDANCE SCREENS
MEMORY POSITION LINK
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Resets the elapsed time of your current trip.
Changes the indicator alarm volumes into three
levels.
Changes the interior light sensitivity to your liking.
Changes the display of the keyless start guidance
screens.
Changes the driver’s seat and the outside mirror
positions to a stored setting.
103
104
105
106
108
109
110
113
ENGLISH
FRENCH
SPANISH
5°F
0°F
5°F
(U.S.)
3°C
0°C
3°C
(Canada)
ON
OFF
IGN OFF
TRIP A
TRIP B
HIGH
MID
LOW
MAX
HIGH
MID
ON
OFF
ON
OFF
1 :
2 :
Default setting
Only on models with keyless access system
Group Setup
Menu Item
Description
Page
Setting Option
2
1
1
1
1
1
1
1
1
1
Multi-Information Display
96
12/07/20 10:42:13 31TK4640_101
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
*
*
*
*
*
*
*
Description
Menu Item
CONTINUED
Group Setup
Page
Setting Option
Changes which doors unlock when you use the
remote or grab the driver’s door handle.
Causes some exterior lights to blink when you
unlock/lock the doors by grabbing or touching the
sensor/pushing the button on the driver’s door
handle.
Causes the beeper to sound when you unlock/lock
the doors by grabbing or touching the sensor/
pushing the button on the driver’s door handle.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.
DOOR UNLOCK MODE
KEYLESS ACCESS LIGHT
FLASH
KEYLESS ACCESS BEEP
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
KEYLESS ACCESS
SETUP
(P.115)
LIGHTING SETUP
(P.120)
116
117
118
121
122
123
60 sec
0 sec
LOW
MIN
DRIVER DOOR
ALL DOORS
ON
OFF
ON
OFF
15 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
1 :
2 :
Default setting
Only on models with keyless access system
2
1
1
1
1
1
1
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
97
12/07/20 10:42:19 31TK4640_102
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
*
*
*
*
*
*
Description
Menu Item
Page
Group Setup
Setting Option
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
Changes which doors unlock with the remote
transmitter/keyless access remote on the first
push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
127
128
130
131
133
134
DOOR SETUP
(P.125)
DEFAULT ALL
(P.134)
OFF
WITH VEH SPD
SHIFT FROM P (A/T only)
OFF
DRIVER DOOR
With SHIFT to P
(A/T only)
ALL DOORS With
SHIFT to P (A/T only)
DRIVER DOOR With IGN OFF
ALL DOORS With IGN OFF
DRIVER DOOR
ALL DOORS
ON
OFF
30 sec
60 sec
90 sec
CANCEL
SET
Default setting
1 :
2 :
3 :
Default setting for automatic transmission
Default setting for manual transmission
1
2
1
1
1
Multi-Information Display
98
12/07/20 10:42:25 31TK4640_103
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст