Chevrolet Silverado / GMC Sierra. Manual — part 2788

Installation Procedure

Fig. 59: View Of Sunroof Window Panel Screws
Courtesy of GENERAL MOTORS CORP.

1. Position the sunroof window panel to the sunroof module.

Ensure that the information logo stencil is towards the rear of the sunroof opening.

2. Install the sunroof window panel screws to the sunroof window panel.

Tighten: Tighten the sunroof window panel screws to 4 N.m (35 lb in).

3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and

Opening Fit Adjustment.

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Sunroof - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

4. Inspect the sunroof window panel for proper operation.

SUNROOF WINDOW REPLACEMENT (CREW CAB)

Removal Procedure

1. Open the sunshade panel.

Fig. 60: Sunroof Window And Retaining Screws
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The sunroof must be in the fully closed position prior to

removing the sunroof window.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Sunroof - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

2. Remove the 4 screws (2) that retain the sunroof window (1) to the sunroof module

assembly.

3. Remove the sunroof window from the top of the vehicle.

Installation Procedure

Fig. 61: Sunroof Window And Retaining Screws
Courtesy of GENERAL MOTORS CORP.

1. Position the sunroof window (1) to the vehicle.

2. Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module

assembly.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Sunroof - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado