Chevrolet Silverado / GMC Sierra. Manual — part 2265

DRIVETRAIN AND FRONT SUSPENSION FRAME FRONT CROSSMEMBER REPLA
REPLACEMENT (1500, 2500 LD)

1

Tighten: 120 N.m (89 lb ft)

NOTE:

Refer to Fastener Notice .

2

Engine Front Crossmember Bolt (Qty: 2)
Tip:

1. Remove all traces of the original adhesive patch.

2. Clean the threads of the bolt with denatured alcohol or equivalent and

allow to dry.

3. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488).

3

Engine Front Crossmember Nut (Qty: 2)

Tighten: 120 N.m (89 lb ft)

4

Engine Front Crossmember Bolt (Qty: 2)
Tip:

1. Remove all traces of the original adhesive patch.

2. Clean the threads of the bolt with denatured alcohol or equivalent and

allow to dry.

3. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488).

5

Lower Control Arm Crossmember

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Frame and Underbody - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra

& Silverado

Fig. 9: View Of Drivetrain and Front Suspension Frame Front Crossmember (1500, 2500
LD)
Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedure:
Remove the oil pan skid plate. Refer to Oil Pan Skid Plate Replacement (2500/3500
with RPO NZZ).

1

Engine Front Crossmember Nut (Qty: 4)

Tighten: 50 N.m (37 lb ft) plus 120 degrees

NOTE:

Refer to Fastener Notice .

Engine Front Crossmember Bolt (Qty: 4)

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Frame and Underbody - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra

& Silverado