Chevrolet Silverado / GMC Sierra. Manual — part 2287
10. Remove the torsion bar from the vehicle.
Installation Procedure
1. Position the torsion bar in the lower control arm.
2. Install the torsion bar in the support assembly.
Fig. 45: Upper Link, Mounting Nuts & Bolts
Courtesy of GENERAL MOTORS CORP.
interchangeable
2008 Chevrolet Silverado 1500
2008 SUSPENSION Front Suspension - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
3. Install the upper link mounting nut (2) and the bolt (1) in the link (3).
Tighten: Tighten the nut to 95 N.m (70 lb ft).
Fig. 46: Torsion Bar, Adjustment Bolt & Nut (MN8, MT1 And MW3)
Courtesy of GENERAL MOTORS CORP.
4. Install the adjustment arm (2) in the support assembly (1).
5. Install the adjuster bolt (3) and the adjustment nut (4).
6. Slide the torsion bar rearward until the torsion bar is fully seated in the adjustment arm.
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 SUSPENSION Front Suspension - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 47: J 36202, Adjustment Arm & Crossmember
Courtesy of GENERAL MOTORS CORP.
7. Install the J 36202 on the adjustment arm and the support assembly. See Special Tools.
8. Using the J 36202 , increase the tension on the adjustment arm in order to load the torsion
bar. See Special Tools.
9. Align the reference marks, turn the adjuster bolt the same amount of turns as it took to
remove it.
10. Remove the J 36202 from the support assembly. See Special Tools.
11. Remove the safety stand and lower the vehicle.
12. Measure the Z height. Refer to Trim Height Inspection .
TORSION BARS BUSHING REPLACEMENT
2008 Chevrolet Silverado 1500
2008 SUSPENSION Front Suspension - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 48: Torsion Bars Bushing
Courtesy of GENERAL MOTORS CORP.
Callout
Component Name
Preliminary Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the torsion bars. Refer to Torsion Bar and Support Assembly
Replacement (Bushing Style) or Torsion Bar and Support Assembly
2008 Chevrolet Silverado 1500
2008 SUSPENSION Front Suspension - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст