Chevrolet Silverado / GMC Sierra. Manual — part 1048
Fig. 87: Compressing Servo Cover Using J 29714-A
Courtesy of GENERAL MOTORS CORP.
7. Remove the oil pan bolt below the servo.
8. Install the J 29714-A . See Special Tools.
9. Tighten the bolt on J 29714-A in order to compress the servo cover. See Special Tools.
Fig. 88: View Of Servo Cover Ring
Courtesy of GENERAL MOTORS CORP.
10. Remove the servo cover ring.
11. Remove the J 29714-A . See Special Tools.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 89: Servo Cover & O-Ring Seal
Courtesy of GENERAL MOTORS CORP.
12. Remove the servo cover and O-ring seal. If the cover is hung up on the seal, use a pick (2) in
order to pull and stretch the seal (1) out of the groove. Cut and remove the O-ring seal
before removing the cover.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 90: View Of 2-4 Servo
Courtesy of GENERAL MOTORS CORP.
13. Remove the 2-4 servo.
14. Inspect the 4th apply piston, 2-4 servo converter, 2nd apply piston, and the servo piston
inner housing for the following defects:
Cracks
Scoring
Burrs and nicks
Installation Procedure
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
1. Install NEW seals onto the servo pistons and the servo cover.
Fig. 91: View Of 2-4 Servo
Courtesy of GENERAL MOTORS CORP.
2. Install the 2-4 servo.
3. Install the J 29714-A . See Special Tools.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст