Chevrolet Silverado / GMC Sierra. Manual — part 110
Installation Procedure
Fig. 360: View Of Oil Filter
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
1. Lubricate the oil filter gasket with clean engine oil.
2. Install the oil filter.
Tighten: Tighten the filter to 30 N.m (22 lb ft).
Fig. 361: Identifying Oil Drain Plug
Courtesy of GENERAL MOTORS CORP.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
3. Install the drain plug.
Tighten: Tighten the plug to 25 N.m (18 lb ft).
4. Lower the vehicle.
5. Fill the engine with the proper capacity and quality of engine oil. Refer to Approximate
Fluid Capacities .
6. Operate the engine, check for leaks, and oil pressure.
REPAIR INSTRUCTIONS - OFF VEHICLE
DRAINING FLUIDS AND OIL FILTER REMOVAL
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 362: Identifying Oil Drain Plug
Courtesy of GENERAL MOTORS CORP.
1. Remove the oil pan drain plug and allow the engine oil to drain into a suitable container.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст