Chevrolet Silverado / GMC Sierra. Manual — part 1778
Fig. 284: View Of Generator Bracket Bolts & Idler Pulley Bolts
Courtesy of GENERAL MOTORS CORP.
1. Position the idler pulleys to the generator bracket and tighten the pulley bolts (2), if
necessary.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
2. Position the generator bracket to the engine and install the bolts (1).
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 285: View Of Engine Wiring Harness Clip Bolt
Courtesy of GENERAL MOTORS CORP.
3. Position the engine wiring harness and install the engine wiring harness clip bolt (1).
Tighten: Tighten the bolt to 10 N.m (89 lb in).
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 286: View Of Fuel Feed Pipe Bracket Bolts
Courtesy of GENERAL MOTORS CORP.
4. Install the fuel feed pipe bracket bolts (1).
Tighten: Tighten the bolts to 24 N.m (18 lb ft).
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 287: View Of Fuel Filter Adapter Stud, Generator Bracket Stud & Inlet Hose
Bracket Nuts
Courtesy of GENERAL MOTORS CORP.
5. Position the heater inlet hose/pipe to the engine.
6. Install the heater inlet hose bracket to the generator bracket stud (2) and install the bracket
nut (3).
Tighten: Tighten the nut to 9 N.m (80 lb in).
7. Install the heater inlet hose to the fuel filter adapter stud (1) and install the bracket nut (4).
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст