Chevrolet Silverado / GMC Sierra. Manual — part 441
Fig. 92: View Of Upper Oil Fill Tube Bolt
Courtesy of GENERAL MOTORS CORP.
6. Install the upper oil fill tube bolt (1).
Tighten: Tighten the bolts to 21 N.m (15 lb ft).
7. Install the drive belt. Refer to Drive Belt Replacement.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
8. Install the fan and clutch assembly. Refer to Cooling Fan and Shroud Replacement
(Non-HP2) .
OIL LEVEL INDICATOR AND TUBE REPLACEMENT
Removal Procedure
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 93: View Of Oil Level Indicator Tube & Bolt
Courtesy of GENERAL MOTORS CORP.
1. Remove the oil level indicator.
2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
(6.6L) .
3. Remove the starter motor. Refer to Starter Motor Replacement (6.6L) .
4. Remove the oil level indicator tube bolt at the indicator tube bracket.
5. Remove the oil level indicator tube and O-ring seals.
6. Remove and discard the O-ring seals.
Installation Procedure
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст