Chevrolet Silverado / GMC Sierra. Manual — part 23

Fig. 35: Engine Mount Bolts
Courtesy of GENERAL MOTORS CORP.

5. Remove the engine mount bolts.

6. Remove the engine mount.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado

Fig. 36: Engine Mount Side Bracket & Bolts
Courtesy of GENERAL MOTORS CORP.

7. If necessary, remove the engine mount side bracket bolts and bracket.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado

Fig. 37: Engine Mount Bracket & Bolts
Courtesy of GENERAL MOTORS CORP.

8. Remove the engine mount bracket bolts.

9. Remove the engine mount bracket.

Installation Procedure

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado

Fig. 38: Engine Mount Bracket & Bolts
Courtesy of GENERAL MOTORS CORP.

1. Install the engine mount bracket.

2. Perform the following procedure prior to installing the engine mount bracket bolts.

1. Remove all traces of the original adhesive patch.

2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.

3. Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the

bolts.

3. Install the engine mount bracket bolts.

Tighten: Tighten the engine mount bracket bolts to 75 N.m (55 lb ft).

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado

Была ли эта страница вам полезна?

3 посетителя считают эту страницу полезной.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.