Chevrolet Silverado / GMC Sierra. Manual — part 1682

Fig. 270: View Of Coolant Heater Cord & Components
Courtesy of GENERAL MOTORS CORP.

4. Remove the coolant heater cord retainer (5) from the frame.

5. Remove the coolant heater cord clip (6) from the front brake front pipe.

6. Lower the vehicle.

7. Remove the coolant heater cord bolt (4) from the frame.

8. Remove the coolant heater cord clip (2) from the chassis harness.

9. Remove the coolant heater cord clip (1) from the front spring stud.

10. Remove the coolant heater cord from the vehicle.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Installation Procedure

Fig. 271: View Of Coolant Heater Cord & Components
Courtesy of GENERAL MOTORS CORP.

1. Install the coolant heater cord to the vehicle.

2. Install the coolant heater cord clip (1) to the front spring stud.

3. Install the coolant heater cord clip (2) to the chassis harness.

4. Position the coolant heater cord clip to the frame and install the coolant heater cord bolt

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

(4).

Tighten: Tighten the bolt to 8 N.m (71 lb in).

5. Raise the vehicle.

6. Install the coolant heater cord clip (6) to the front brake front pipe.

7. Position the coolant heater cord clip to the frame and install the coolant heater cord retainer

(5).

Fig. 272: View Of Coolant Heater Cord

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado