Chevrolet Silverado / GMC Sierra. Manual — part 2977

Fig. 36: View Of Rear Side Window Catch Screws, Gasket, Nuts & Frame
Courtesy of GENERAL MOTORS CORP.

1. Install the rear sliding window (4) to the frame.

2. Align the window to the upper and lower frame, push down the window and then pull

upward locking the window in the frame.

3. Slide the window all the way to the right (passenger side).

4. Install the rear sliding window catch screws (1), catch, gasket (2) and nuts (3).

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Tighten: Tighten the nuts to 3 N.m (27 lb in).

Fig. 37: View Of Regulator & Cables
Courtesy of GENERAL MOTORS CORP.

5. Slide window by hand, back and forth in the window frame to ensure proper operation

before installing the regulator to the motor.

6. Install the window to the halfway position.

7. Install the regulator (1) and cables (2) to vehicle.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado