DAF 95XF. Manual — part 331
5
MODIFICATIONS TO THE ELECTRICAL INSTALLATION
Modifications to the electrical installation from chassis number 0E473500
3-10
Column 1
Column 2
Column 3
F531
Sensor for accelerator pedal E-gas
815
F533
Vehicle-speed sensor (4-pin), 1st
22
F535
Sensor for engine coolant temperature
115
F544
Sensor for coolant temperature of secondary retarder
456/469
F552
Crankshaft position sensor
917
F555
Boost pressure sensor
923
F558
Camshaft position sensor
915
F561
Inlet-air temperature sensor
918
F565
Fuel temperature sensor
920
F566
Sensor for engine coolant temperature
921
F571
Sensor for accelerator pedal ECS
840/841/924/927
F585
Sensor for engine coolant level
167
F608
Sensor for fuel level
116
F612
Height sensor, ECAS left-hand rear axle
626/655
F613
Height sensor, ECAS right-hand rear axle
627/657
F614
Height sensor, ECAS front axle
628/658
F615
Pressure sensor, ECAS driven axle, left/right
659
F616
Cab locking sensor
289
F620
Sensor for oil temperature in Voith retarder 133-2
454
G000
Relay, width/marker/tail lights
207/220
G001
Relay, dipped beam
217/245
G002
Relay, main beam
218/249
G003
Relay, spotlights
219/251
G004
Relay, front fog light
210/254
G005
Relay, rear fog light
214/256
G014
Glow-filament relay
30/76/932/947
G015
Contact relay
5/15
G028
Relay for electric window control, co-driver’s side
722/730
G029
Relay for electric window control, co-driver’s side
724/732
G030
Relay for electric window control, driver’s side
726/738
G031
Relay for electric window control, driver’s side
728/739
G036
Relay for brake light, 1st
280/281
G052
Lifting-gear motor relay
609/617
G065
Heater fan relay
520/524
G066
Lifting-gear takeover relay
609/611
G126
Relay for UPEC power supply
916/917
G170
Auxiliary-heating fan relay
520/531
G178
Relay, accessories
16/17
G201
Relay for fuel heater EFPH
794/797
G203
Starting-motor takeover relay
9/14
G231
Radio lighting relay (12V)
706/708/712/713
G234
Relay for window control, fuel filter/water separator
785/791
G236
Windscreen wiper microrelay (speed 1 or 2)
84/86
G237
Windscreen wiper microrelay (automatic zero position)
85/88
G238
Headlight-washer microrelay
83/94
G239
Relay for disengaging third brake
421/434
G240
PTO/engine speed microrelay
101/153
G243
Engine brake (DEB) microrelay
438/440/443/936
G247
Auxiliary-heating fan relay
519/526
G257
Recirculation valve microrelay
381/383
G258
Recirculation valve microrelay
381/384
G259
N-10-PTO control relay
272/273
11
ǹ 0209
5
Modifications to the electrical installation from chassis number 0E473500
MODIFICATIONS TO THE ELECTRICAL INSTALLATION
3-11
Column 1
Column 2
Column 3
G267
Air-conditioning microrelay
369/372
G279
Air-conditioning microrelay
371/375
G280
Heater fan relay
378/380
G284
Microrelay for Voith retarder 133-2
446/447
G297
Cab air suspension relay
288/291
G300
Microrelay for auxiliary heating, Thermo 90
517/518
G301
Microrelay, light D+
203/204
G302
Microrelay for Swedish lighting
202/206
G321
UPEC connector relay for the body builder
910/911
G328
UPEC engine stop relay
909/944
G516
Central earth cab co-driver’s side
294
G525
Central earth flywheel housing motor
847
G718
Connection parking brake/PTO
102
G721
Speed regulator switch connection
818/839
G723
Connection for central door locking
694
G725
Connection for auxiliary heating D3LC
510
G726
Connection panel switch DEB
438
11
ǹ 0209
5
MODIFICATIONS TO THE ELECTRICAL INSTALLATION
Modifications to the electrical installation from chassis number 0E473500
3-12
3.4 SUBDIAGRAMS OF CIRCUIT DIAGRAM 1316630/13-23
A
Voltage before and after the contact
1
Charging circuit/starting motor /contact
switch/starter switch
5
CTE-3
7
CWS-2
13
Gearbox and gate safety
19
Search light
20
Heater fan/air-conditioning system
23
ABS/ASC
28
E-gas 3
36
Automatic windows/roof hatch/central
door locking
42
Connector sockets FT
43
Connector sockets FA
46
Auxiliary heating Eberspächer
Hydronic 10
47
UPEC
11
ǹ 0209
5
Modifications to the electrical installation from chassis number 0E473500
MODIFICATIONS TO THE ELECTRICAL INSTALLATION
3-13
A. VOLTAGE BEFORE AND AFTER CONTACT
VOLTAGE BEFORE CONTACT
A constant voltage is applied to both the
Pertinax block and connectors 416 and 417
through wire 1000 and connector 114 (pins A
and B). These wires are NOT fuse-protected.
They can only be made dead by disconnecting
the battery leads or by disconnecting
connector 114.
VOLTAGE AFTER CONTACT
A voltage is applied to the Pertinax connection
block through the starting motor (point 30) and
the alternator (B+). This connection point can be
connected to wire 1010 through contact relay
G015. This wire is NOT fuse-protected.
OPERATION
If the contact/starter switch (C539) is switched
to the “accessories” position (connection
between points 1 and 6), voltage is applied
through wire 1130 to relay G178. If the
contact/starter switch is switched to the “contact”
position (connection between points 1 and 4),
the relay is activated through wire 4001.
This relay then connects wire 1000 (voltage
before contact) to wire 1010 (voltage after
contact). If the contact/starter switch (C539) is
turned further against the spring pressure
(connection between points 1 and 2), relay
G015 remains activated and the starting-motor
relay (B010) is also activated. The starting motor
will now start operating.
If the starter key is released, the contact switch
will automatically return and remain in the
“contact” position. The starting motor (B010) is
no longer activated.
VARIANTS
Location
6
Wire 4009 only applies in the case of a VF.
11
ǹ 0209
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст