DAF 95XF. Manual — part 522
TECHNICAL DATA
Front axle
8-2
0
200424
0
Trailing axle
TECHNICAL DATA
9-1
9. TRAILING AXLE
9.1 GENERAL
Wheel bearing play
0.025 - 0.25 mm
Hub cap sealant
Silicone sealant
9.2 TIGHTENING TORQUES
Wheel hub lock nut, 09N220 axle
560 Nm
Wheel hub lock nut, 09N075 axle
210
30 Nm
Hub cap bolts, 09N220 axle
70 Nm
Wheel nut (steel/aluminium)
700 Nm
Tighten after 100 km
200424
TECHNICAL DATA
Trailing axle
9-2
200424
0
0
Leading rear axle 09N044 (FTP-type vehicles)
TECHNICAL DATA
10-1
10.LEADING REAR AXLE 09N044 (FTP-TYPE VEHICLES)
10.1 GENERAL
Wheel bearing play
0 mm
10.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of standard
tightening torques. Any other threaded
connections that are not specified must
therefore be tightened to the tightening torque
stated in the overview of standard tightening
torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
Hub nut
100 Nm
(1)
Hub cap
500 Nm
U-bolt nut M20, property class 10
553 Nm
(2)
(1)
Turn back until split pin can be fitted.
(2)
Evenly tighten the two U-bolt nuts alternately.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст