DAF 95XF. Manual — part 157
©
200438
1-1
EBS fault codes
EBS
DAVIE XD diagnostics manual
1
1. EBS FAULT CODES
1.1 INTRODUCTION
If the electronic unit detects a system fault, this
fault is usually stored in the memory of the
electronic unit as a fault code.
Most system faults will also generate a warning.
EBS
1-2
©
200438
EBS fault codes
1
DAVIE XD diagnostics manual
1.2 EXPLANATORY NOTES TO EBS FAULT CODES
If there is an electrical fault in the EBS system,
the symptom "open circuit in EBS pressure
control" or "deactivation of EBS pressure control"
may occur as a system reaction.
Open circuit in EBS pressure control
On application of the foot brake valve, the
electronic unit will receive information on the
desired vehicle deceleration from the brake pedal
position sensor in the foot brake valve.
In the electronic unit, this vehicle deceleration
command is converted into brake pressure to the
brake cylinders.
If there is no feedback from the output pressure
or wheel speed, there will be less accurate
electronically controlled deceleration and brake
force distribution.
Deactivation of EBS pressure control
The output pressure control in the brake cylinders
is entirely pneumatic; i.e. there is no more
electronically controlled deceleration and brake
force distribution.
Fault code
Fault code description with possible cause
Symptom
11-18
Voltage on pin A8 of the EBS unit is too low due
to:
-
contact resistance or poor connection to pin
A8 of the EBS unit
-
ABS on front axle deactivated
-
ASR brake control deactivated
-
EBS pressure control on front axle and
drawn vehicle deactivated
11-31
Extremely low voltage (<3 V) on pin A8 of the
EBS unit due to:
-
excessive contact resistance on pin A8 of
the EBS unit
-
interruption on pin A8 of the EBS unit
-
ABS on front axle deactivated
-
ASR brake control deactivated
-
EBS pressure control on front axle and
drawn vehicle deactivated
12-18
Voltage on pin A9 of the EBS unit is too low due
to:
-
contact resistance or poor connection to pin
A9 of the EBS unit
-
short circuit to earth on pin B7 of the EBS
unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on rear axle
deactivated
12-31
Extremely low voltage (<3 V) on pin A9 of the
EBS unit due to:
-
excessive contact resistance on pin A9 of
the EBS unit
-
interruption on pin A9 of the EBS unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on rear axle
deactivated
Short circuit to earth on pin E4 or B7 of the EBS
unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on rear axle
deactivated
-
Pin B7 is connected to earth inside the EBS
unit while the power supply to A9 and E4 is
interrupted inside the unit.
©
200438
1-3
EBS fault codes
EBS
DAVIE XD diagnostics manual
1
13-18
Voltage on pin A7 of the EBS unit is too low due
to:
-
contact resistance or poor connection to pin
A7 of the EBS unit
-
No noticeable system limitation in EBS
14-32
Sensor supply voltage on pins D9, B13 or E1 of
the EBS unit due is too low due to:
-
contact resistance or poor connection on
specified connection points of the EBS unit
-
short circuit to earth on specified connection
points of the EBS unit
-
No noticeable system limitation in EBS
14-33
Constant voltage, even if the ignition is turned off
and the brake is not applied, on pin D9, B13 or E1
of the EBS unit due to:
-
short circuit to supply on specified
connection points of the EBS unit
-
No noticeable system limitation in EBS
15-33
Constant voltage, even if the ignition is turned off
and the brake is not applied, on pin B7 of the EBS
unit due to:
-
short circuit to supply on pin B7 of the EBS
unit
-
No noticeable system limitation in EBS
16-11
Internal failure in EBS electronic unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
16-12
Configuration parameters in the electronic unit
incorrect due to:
-
incorrect programming
-
retrofitted components without identification
card (oxford) change
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
16-15
Internal failure in EBS electronic unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
16-17
Voltage (>32 V) on pins A7, A8 and A9 of the EBS
unit is too high due to:
-
excessive alternator/battery voltage
-
inductive voltage of external component
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
16-18
Voltage on pins A7, A8 and A9 of the EBS unit at
a speed of >2 km/h is too low due to:
-
insufficient battery voltage
-
poor earth connection to EBS electronic unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
16-53
Incorrect tyre size due to:
-
incorrectly programmed tyre size
-
tyre sizes of front and rear axles in different
tyre classes without unit having been
reprogrammed
-
The difference in peripheral speed between
the left and right wheel on the same axle
exceeds 10%
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
21-37
Interruption on pin C4 and/or C5 of the EBS unit,
wheel speed sensor (F513)
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
Fault code
Fault code description with possible cause
Symptom
EBS
1-4
©
200438
EBS fault codes
1
DAVIE XD diagnostics manual
21-38
Unacceptable wheel speed sensor frequency
signal from wheel speed sensor (F513) on pins
C4 and C5 of the EBS unit due to:
-
loose pole ring
-
wrong assessment by EBS unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
21-41
Short circuit to earth on pin C4 and/or C5 of the
EBS unit, wheel speed sensor (F513)
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-42
Short circuit to supply on pin C4 and/or C5 of the
EBS unit, wheel speed sensor (F513)
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-44
Short circuit on pin C4 and/or C5 of the EBS unit,
wheel speed sensor (F513)
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-45
Incorrect wheel speed sensor sine-wave signal
from wheel speed sensor (F513) on pins C4 and
C5 of the EBS unit due to:
-
distorted wheel speed sensor ring
-
damaged wheel speed sensor ring
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-46
No uniformity (frequency changes) of wheel
speed sensor signal from wheel speed sensor
(F513) on pins C4 and C5 of the EBS unit due to:
-
heavy point due to brake disc wobble, for
example
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-47
Excessive oscillation of wheel speed sensor
signal (maximum/minimum level) from wheel
speed sensor (F513) on pins C4 and C5 of the
EBS unit due to:
-
excessive wheel bearing play
-
incorrect mounting of wheel speed sensor
ring
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
21-48
Minimum value of wheel speed sensor signal
from wheel speed sensor (F513) on pins C4 and
C5 of the EBS unit is too low due to:
-
too large an air gap between wheel speed
sensor ring and wheel speed sensor
-
contact resistance on pin C4 and/or C5 of
the EBS unit
-
ABS on front axle, right deactivated
-
ASR brake/engine control deactivated
22-37
Interruption on pin D7 and/or D8 of the EBS unit,
wheel speed sensor (F512)
-
ABS on front axle, left deactivated
-
ASR brake/engine control deactivated
22-38
Unacceptable wheel speed sensor frequency
signal from wheel speed sensor (F512) on pins
D7 and D8 of the EBS unit due to:
-
loose pole ring
-
wrong assessment by EBS unit
-
ABS on front and rear axles deactivated
-
ASR brake/engine control deactivated
-
EBS pressure control on front axle, rear axle
and drawn vehicle deactivated
22-41
Short circuit to earth on pin D7 and/or D8 of the
EBS unit, wheel speed sensor (F512)
-
ABS on front axle, left deactivated
-
ASR brake/engine control deactivated
22-42
Short circuit to supply on pin D7 and/or D8 of the
EBS unit, wheel speed sensor (F512)
-
ABS on front axle, left deactivated
-
ASR brake/engine control deactivated
22-44
Short circuit on pin D7 and/or D8 of the EBS unit,
wheel speed sensor (F512)
-
ABS on front axle, left deactivated
-
ASR brake/engine control deactivated
Fault code
Fault code description with possible cause
Symptom
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст