DAF 95XF. Manual — part 847
1
SEATS
Contents
2
7
ᓻ 0209
1
Safety instructions
SEATS
1-1
1. SAFETY INSTRUCTIONS
-
Replace the seat belt if the belt is worn
or damaged.
-
If the seat belts have been highly
stressed during a collision, the entire
mechanism must be replaced, even if no
damage can be observed.
-
Always check the seat attachments for
any fractures or cracks after a collision.
-
After a collision, always check whether
the seat slide and seat attachment bolts
have been subjected to excessive
stress. If in doubt, replace them.
-
Do not use abrasive cleaning agents to
clean the seat belts; these may damage
the seat belt material.
7
ᓻ 0209
1
SEATS
Safety instructions
1-2
7
ᓻ 0209
1
General
SEATS
2-1
2. GENERAL
-
Seat repairs must be carried out by trained
technicians only.
-
The illustrations in this manual usually
represent the left-hand seat or the left-hand
side. For the right-hand seat or right-hand
side, repairs are carried out in a similar way.
-
After each repair, a functional test must be
carried out; in the case of pneumatic
repairs, also carry out an air-tightness test.
-
Do not lean on the seat if the back rest has
been fully folded forwards.
-
It is necessary, however, to restore routing
of the air pipes and cables and their
connections to the original positions.
-
Also keep to the proper colour position
when installing the air pipes.
-
Air pipes and cables must not be kinked.
-
In the case of transport and storage, ensure
that the seat is placed on its longitudinal
slides. Air pipes must not be kinked in this
case.
-
After each repair, a functional test must be
carried out; in the case of pneumatic
repairs, also carry out an air-tightness test.
-
Do not lean on the seat if the back rest has
been fully folded forwards.
7
ᓻ 0209
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст