DAF 95XF. Manual — part 557
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Draining and filling
5-6
If the vehicle is equipped with water/air cab
heater
1.
Run the engine at idling speed.
2.
Switch on the cab heater, using the rocker
switch on the dashboard.
3.
Turn the heater temperature control knob in
the cab to the ”warmest” setting.
4.
Switch on the heater fan.
5.
Set the rocker switch on the thermostat in
the cab to position 1.
Note:
Combustion will start after approximately
one minute.
6.
Allow the cab heater to operate for
approximately 15 minutes.
7.
Then check the coolant level.
5
200424
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
5-7
5.4 DRAINING AND FILLING, DIFFERENTIAL
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
1347 axle
Draining the differential
1.
Position the vehicle on a level surface.
2.
Remove the level check/filler plug (A) and
drain plug (B) and drain the oil.
Filling the differential
1.
Position the vehicle on a level surface.
2.
Fit the drain plug (B) using the special torx
spanner (DAF no. 1329422) and tighten it to
the specified torque. See ”Technical data”.
3.
Fill the differential with the specified quantity
of oil. See ”Technical data”.
4.
Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
5.
Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
M8013
A
B
5
200424
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Draining and filling
5-8
1354 axle
Draining the differential
1.
Position the vehicle on a level surface.
2.
Lower the trailing axle, if present, on a
leaf--sprung version.
3.
Remove the level check/filler plug (A) and
drain plug (B) and drain the oil.
Filling the differential
1.
Position the vehicle on a level surface.
2.
Fit the drain plug (B) using the special torx
spanner (DAF no. 1329422) and tighten it to
the specified torque. See ”Technical data”.
3.
Fill the differential with the specified quantity
of oil. See ”Technical data”.
4.
Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
5.
Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
B
A
M8048
5
200424
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
5-9
1355 (T) axle
Draining the differential, first axle
1.
Position the vehicle on a level surface.
2.
Remove the level check/filler plug (A) and
drain plugs (B) and drain the oil.
Filling the differential, first axle
1.
Position the vehicle on a level surface.
2.
Fit the drain plugs (B) using the special torx
spanner (DAF no. 1329422) and tighten
them to the specified torque. See ”Technical
data”.
3.
Fill the differential with the specified quantity
of oil. See ”Technical data”.
4.
Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
B
B
A
M8049
5.
Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
Draining the differential, second axle
1.
Position the vehicle on a level surface.
2.
Remove the level check/filler plug (A) and
drain plug (B) and drain the oil.
Filling the differential, second axle
1.
Position the vehicle on a level surface.
2.
Fit the drain plug (B) using the special torx
spanner (DAF no. 1329422) and tighten it to
the specified torque. See ”Technical data”.
3.
Fill the differential with the specified quantity
of oil. See ”Technical data”.
4.
Check the oil level after approximately 5
minutes. See ”Inspection and adjustment”.
5.
Fit the level check/filler plug (A) ) using the
special torx wrench (DAF no.1329422) and
tighten the plug to the specified tightening
torque. See ”Technical data”.
B
A
M8050
5
200424
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст