DAF 95XF. Manual — part 861

1

ACCESSORIES

Removal and installation

3-6

3.8 REMOVAL AND INSTALLATION, ROOF SPOTLIGHTS

Removing roof spotlights
1.

Unplug the connector to the roof spotlight,
coming from connector (291) to the left
behind the overhead boxes underneath the
bottom plate.

2.

Remove the attachment bolts from the
bracket and remove the bracket complete
with roof spotlights from the cab roof.

Installing roof spotlights
1.

Fit the bracket with roof spotlights to the
cab.

2.

Fit the connector.

3.

Check that the cable duct through the cab
roof is water-tight. If necessary, seal the
passage again.

3.9 REMOVAL AND INSTALLATION, AIR HORNS

Removing air horn on roof spoiler
1.

Remove the attachment bolts from the air
horn and remove the air horn from the roof
spoiler.

Note:
If, after removal of the attachment bolts, the air
horn cannot be removed from the spoiler, the air
horn has been retrofitted as an accessory. In
this case, detach the air pipe on the inside of the
spoiler.

Installing air horn on roof spoiler
1.

Fit the air horn to the roof spoiler using
attachment bolts.

Removing air horn on roof
2.

Remove the attachment bolts from the air
horn and remove the air horn from the roof.

Note:
If, after removal of the attachment bolts, the air
horn cannot be removed from the roof, the air
horn has been retrofitted as an accessory. In
this case, remove the headlining to disconnect
the air pipe.

8

ᓻ 0209

1

Removal and installation

ACCESSORIES

3-7

Installing air horn on roof
1.

Fit the air horn to the roof using attachment
bolts.

3.10 REMOVAL AND INSTALLATION, ROTATING BEAM

Removing rotating beam
1.

Remove the glass (1) of the rotating beam
by pressing the locking clip at the bottom of
the glass and turning the glass
counter-clockwise out of the lamp
socket (2).

2.

Unplug the connector to the rotating beam,
coming from connector (291) to the left
behind the overhead boxes underneath the
bottom plate.

3.

Remove the three attachment bolts (3) and
remove the lamp socket from the roof.

Installing rotating beam
1.

Fit the lamp socket (2) to the roof and
tighten the attachment bolts (3).

2.

Fit the connector.

3.

Turn the glass (1) of the rotating beam
clockwise onto the lamp socket (2).
Continue turning the glass until the locking
clip “clicks” into the lock.

K1 01 414

1

2

3

8

ᓻ 0209

1

ACCESSORIES

Removal and installation

3-8

8

ᓻ 0209

1

Contents

PREWAX TREATMENT

1

CONTENTS

Page

Date

1.

SAFETY INSTRUCTIONS

1-1

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.

GENERAL

2-1

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.1

Notes on re-treatment

2-1

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.2

Treatment of the cab front

2-2

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.3

Treatment of door post

2-3

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.4

Treatment of the door sill

2-4

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.5

Treatment of the tool box

2-5

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.6

Treatment of the back panel

2-5

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.7

Surface treatment of the roof hatch

2-6

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

2.8

Treatment of the bottom

2-6

0209

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

10

ᓻ 0209