DAF 95XF. Manual — part 3
0
0
Locking compounds and sealants
TECHNICAL DATA
2-3
OVERVIEW OF SEALANTS
Product
name
Properties
Applications
DAF
number
Dirko D
-
Resistant to temperatures of up
to 180
_C
-
Resistant to oil, coolant
Sealing of surface connections
1345014
Loctite
510
-
Resistant to temperatures of up
to 200
_C
-
Resistant to oil, brake fluid,
coolant
Sealing of surface (flange)
connections that are subjected to
high operating temperatures, such
as the flywheel housing
0697149
Loctite
574
-
Resistant to high pressures (up
to 350 bar)
-
Resistant to oil, brake fluid,
coolant
Sealing of surface connections
against high pressures
1246867
Loctite
Blue
-
Resistant to temperatures
ranging from 60
_C to 260_C
-
Resistant to oil
Sealing of flexible constructions
such as (valve) covers
1242895
Loctite
ultra grey
-
Silicone sealant, good
resistance to coolant
-
Resistant to temperatures of up
to 325
_C
Sealing of (surface) connections in
the cooling system
1284123
Loctite
ultra
copper
-
Silicone sealant, good
resistance to oil
-
Resistant to temperatures of up
to 350
_C
Sealing of surface connections
such as hub covers
1284122
Loctite
5910
-
Silicone sealant, good
resistance to oil
-
Resistant to temperatures of up
to 200
_C
Sealing of surface connections,
such as front and rear covers of
gearboxes, differential housings,
hub covers, shaft collars and oil
cooler
1360102
Loctite
572
-
Seals against low pressure
immediately after fitting
Threaded connections
0292336
Loctite
5205
-
Surface sealant, specially
designed for sealing aluminium
parts
-
Resistant to temperatures of up
to 150
_C
-
Resistant to water, coolant and
oil
Sealing of aluminium parts
1441339
Loctite
Form a
gasket
-
Hardens on contact with metal
and on full closure
For locking, fastening and sealing
1322823
0
TECHNICAL DATA
Locking compounds and sealants
2-4
OTHER PRODUCTS
Product
name
Properties
Applications
DAF
number
Tectyl
-
Protects the cavities of the
superstructure against
corrosion
Post-treatment of cab parts to
protect against corrosion.
Can also be used to protect metal
parts
1343888
Contact
spray
-
Cleaning agent for cleaning and
degreasing electronic and
electrical connections.
Removes moisture and dirt from
electrical contacts
Cleaning of electrical contacts
1387608
Loctite
cleaner
7063
-
Cleans and degreases
-
Non-inflammable and
non-corrosive
For cleaning/de-greasing materials
to which a locking compound must
be applied
1322827
Molykote
BR 2
PLUS
-
Lubricating grease is
heat-resistant from --30
_C to
+130
_C
Everywhere where grease
lubrication is appropriate and
normal
-
For almost all ball and roller
bearings, plain bearings,
guides, couplings, splined
shafts, threaded spindles,
sprocket drives with a low
speed
1389512
Molykote
P37
-
Lubricating grease protects
against corrosion and is
heat-resistant up to 1400
_C.
For threaded connections that are
exposed to high temperatures, as
used for exhaust systems
1391619
Copaslip
-
Copper paste with an excellent
bond, is anti-corrosive and
heat-resistant from --35
_C to
1100
_C.
-
Resistant to water, salts and
acids.
-
Prevents wear, oxidation, rust,
corroding and locking of metal
surfaces.
For connections that are
vulnerable to oxidation or
corrosion, such as battery
terminals, exhaust couplings etc.
1284344
Renolit
HLT2
-
Lubricating grease (white)
Disc brake adjustment device
1448907
Syntheso-
GL EP1
-
Lubricating grease (green)
Rubber guides, disc brake
1448908
Gleitmo
805
-
Protects untreated metals
against corrosion
For parts which are attached with a
fit such as wheel hub units
1443160
0
0
0
Threaded connections
TECHNICAL DATA
3-1
3. THREADED CONNECTIONS
3.1 TIGHTENING TORQUES
TABLE OF STANDARD TIGHTENING TORQUES, STANDARD 00804-203
The tightening torques in the table below are
standard torques and only apply to dipped
threaded connections.
The property codes are stamped on the nut and
bolt, except on the clamping flange bolt. The
clamping flange bolt is recognised by a
constriction between the hexagonal bolt head
and the flange. This constriction is absent in
standard flange bolts.
M2 00 001
Clamping flange bolt
Standard flange bolt
0
TECHNICAL DATA
Threaded connections
3-2
TIGHTENING TORQUES FOR DIPPED THREADED CONNECTIONS
Overview of standard tightening torques for
DAF flange bolts and nuts, strength class
10.9/10.
Thread pitch
Tightening torque (Nm)
Extra angular displacement (
ᐔ 10 %)
for bolt stem length L (mm):
L
≤ 40
41-80
81-130
131-180
M8
30
2
30
_
60
_
90
_
120
_
M10
60
4
45
_
90
_
120
_
150
_
M12 x 1.75
M12 x 1.25
110
8
110
8
30
_
45
_
60
_
90
_
90
_
120
_
120
_
150
_
M14 x 2
M14 x 1.5
170
15
170
15
30
_
45
_
60
_
90
_
90
_
120
_
120
_
150
_
M14 x 2
for brake back plates: 170
15 Nm +60_
M16 x 2
M16 x 1.5
260
20
260
20
30
_
45
_
60
_
90
_
90
_
120
_
120
_
150
_
M18 x 2.5
M18 x 1.5
360
30
360
30
30
_
45
_
45
_
90
_
60
_
120
_
80
_
150
_
M20 x 1.5
520
40
45
_
90
_
120
_
150
_
M22 x 2.5
for steering and track rod arms: 500
50 Nm +90_
The bolt stem length L is the length of the bolt
between the bolt head and the nut.
If a component is attached with several bolts, all
bolts must first be tightened to the specified
torque, and subsequently by the angular
displacement.
0
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст