DAF LF45, LF55 Series. Manual — part 635
©
200515
3-1
Drive shafts, drive and chassis
TECHNICAL DATA
ΛΦ45/55 series
0
3. DRIVE SHAFTS, DRIVE AND CHASSIS
3.1 GENERAL
Allison gearbox
The oil level when cold must be on the "Cold full"
mark.
Dipstick readings:
5.12 rear axle
F36/F48 front axle
HOT
FULL
COLD
FULL
HOT
ADD
COLD
ADD
W 3 03 099
"Cold add"
add when cold
"Cold full"
full when cold
"Hot add"
add when hot
"Hot full"
full when hot
Sealant for crown wheel guide bolt
Loctite 572
Wheel bearing play (to adjust play)
0.05 - 0.20 mm
TECHNICAL DATA
3-2
©
200515
Drive shafts, drive and chassis
0
ΛΦ45/55 series
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are to be
replaced, it is important - unless stated otherwise -
that these bolts and nuts are of exactly the same
length and property class as the removed ones.
ZF S5-42 gearbox
ZF 6S-850 gearbox
2
1
V3 00 395
Level check/filler
plug (2)
50 Nm
Drain plug (1)
50 Nm
2
1
V3 00 884
Level check/filler
plug (1)
50 Nm
Drain plug (2)
60 Nm
©
200515
3-3
Drive shafts, drive and chassis
TECHNICAL DATA
ΛΦ45/55 series
0
Eaton FS6309A gearbox
Allison 1000 & 2000 automatic gearboxes
1
2
3
4
V3 00 376
Level check/filler
plug (1)
50 Nm
Drain plug/oil
strainer (4)
50 Nm
1
V3 00 885
Gearbox drain
plug (1)
35 Nm
2
1
V3 00 883
Oil cooler air bleed
plug (1)
28 Nm
Oil cooler drain
plug (2)
28 Nm
TECHNICAL DATA
3-4
©
200515
Drive shafts, drive and chassis
0
ΛΦ45/55 series
Allison MD3060 automatic gearbox
F36/F48 front axle
Front axles
(1) Retighten after 100 km.
(2) Evenly tighten the two U-bolt nuts alternately.
V300371
2
1
Drain plug (1)
28 Nm
Oil filter cover
attachment bolts (2)
55 Nm
R600520
6
2
3
1
5
4
Tightening torque for
brake calliper
attachment bolts
213 Nm
Tightening sequence
for attachment bolts
Hub lock nut
75 Nm
M18 x 1.5 wheel nut
(LF 45 version 6/8 ton GVW)
370 Nm
M20 x 1.5 wheel nut
(LF 45 version 10/11/12 ton GVW)
485 Nm
M20 x 1.5 wheel nut
(LF 55 version 13/14/15 ton GVW)
485 Nm
M22 x 1.5 wheel nut
(LF 55 version 18 ton GVW)
700 Nm
LF 45 U-bolt nut
215 Nm
U-bolt nut, LF 55 version 13/14/15 ton GVW
470 Nm
U-bolt nut, LF 55 version 18 ton GVW
535 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст