DAF LF45, LF55 Series. Manual — part 511
7
LF45/55 series
Removal and installation
STEERING BOX
4-21
24. Fit the universal joint to the steering box
input shaft. The groove (A) in the coupling
must be aligned with the mark (B) on the
steering-box input shaft.
Check that the universal joint is
correctly in place on the input shaft
so that the attachment bolt can be
fitted in the notch (C).
25. Fit a new, original attachment nut and bolt in
the universal joint.
26. Tighten the attachment bolt to the specified
tightening torque, see “Technical data”.
27. Install the steering rod.
28. If the vehicle has a steered trailing swivel
axle, fit the angle sensor to the steering
box.
29. Fill and bleed the steering gear.
30. Check the operation of the steering box
using the test case.
31. Take a test drive. During the test drive,
check that the steering gear is functioning
properly. After the test drive, check the
steering gear for leaks.
S7 00 594
A
B
C
ᓻ 200322
3
7
STEERING BOX
Removal and installation
LF45/55 series
4-22
ᓻ 200322
3
7
LF45/55 series
Contents
STEERING PUMP
1
CONTENTS
Page
Date
1. INSPECTION AND ADJUSTMENT
1-1
200322
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
1.1
Checking flow-control valve, version without steered trailing swivel axle
1-1
200322
. .
. . . .
1.2
Checking flow-control valve, version with steered trailing swivel axle
1-3
200322
. . . . .
. . . .
2. REMOVAL AND INSTALLATION
2-1
200322
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.1
Removing and installing steering pump,
version without steered trailing swivel axle
2-1
200322
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.2
Removing and installing steering pump,
version with steered trailing swivel axle
2-3
200322
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
4
ᓻ 200322
7
STEERING PUMP
Contents
LF45/55 series
2
4
ᓻ 200322
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст