DAF LF45, LF55 Series. Manual — part 92
0
1
LF45/55 series
Internal and external cab components
TECHNICAL DATA
1-7
Windscreens
Curing times for windscreen adhesive
Product name
DAF number
Vehicle mobile in
workshop after:
Cab can be tilted
after:
Vehicle usable
after:
Sikaflex 255 FC
1271129
6 hours
8 hours
12 hours
Sika Tack Ultrafast
1241020
2 hours
4 hours
6 hours
Sika Tack plus
booster
1357925
1 hour
1 hour
(1)
2 hours
Notes:
(1)
If a vehicle is equipped with an airbag, the
curing time is 2 hours
A relative humidity of less than 50% delays
curing, as does a temperature lower than 20
_C.
Products applied for bonded windscreens
Product name
DAF number
Properties
Applications
Sikaflex 255 FC
1271129
Processing time
20 min.
Adhesive (cold process) for
bonding windscreens
Sika Tack UF
1241020
Processing time
10 min.
Adhesive (warm process) for
bonding windscreens
Sika Tack plus
booster
1357925
Processing time
10 min.
Adhesive (cold process) for
bonding windscreens
Sika Aktivator
1312362
Cleaning fluid for cleaning the glass
and the frame.
Sika remover
SR 208
1241019
Removal of adhesive which has not
yet hardened. Do not use on
surfaces to be bonded.
ǹ 0210
1
TECHNICAL DATA
Internal and external cab components
LF45/55 series
1-8
1.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of the standard
tightening torques. The other threaded
connections which are not stated must therefore
be tightened to the tightening torque stated in
the overview of standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important - unless stated
otherwise - that these bolts and nuts are of
exactly the same length and property class as
the removed ones.
Steering wheel
Steering wheel attachment bolt
50
ᐔ 5 Nm
Universal joint
Universal joint attachment bolt
56
ᐔ 5.6 Nm
(1)
Airbag
Airbag module attachment bolt
5
ᐔ 1 Nm
Contact unit attachment bolt
1.2 Nm
Electronic unit
10
ᐔ 2 Nm
Note:
(1)
Always replace the attachment bolt and
nut.
0
ǹ 0210
0
1
LF45/55 series
Cab suspension
TECHNICAL DATA
2-1
2. CAB SUSPENSION
2.1 GENERAL
The day cab can be fitted with rubber spring
elements at the front. The version with rubber
spring elements at the front does not have a
stabiliser.
The coil spring elements are fitted with shock
absorbers.
The length of the spring elements and the cab
height cannot be adjusted.
On models equipped with coil spring elements at
the front, a difference in cab height can be
corrected to a certain extent using the stabiliser
bar.
At the rear, coil springs are used. The length of
the spring elements varies depending on
whether a day cab or a sleeper cab is involved.
Cab support, general
The distance between the cab
supports (A) measured from the
left side of the left support to the
left side of the right support is:
1000 mm
9
15
10
16
12
11
13
14
K1 00 575
ǹ 0210
1
TECHNICAL DATA
Cab suspension
LF45/55 series
2-2
Cab support with silentblock
Silent block mounting angle (A)
67
_ - 71_
A
K1 01 475
Cab support with coil spring suspension
Silent block mounting angle (A)
18
_ - 22_
A
K1 01 442
0
ǹ 0210
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст