DAF LF45, LF55 Series. Manual — part 216
©
200508
2-1
Pneumatic gearbox control
TECHNICAL DATA
ΛΦ45/55 series
3
0
2. PNEUMATIC GEARBOX CONTROL
2.1 GENERAL
Filter/governor
Governed pressure
5.34 - 5.69 bar
TECHNICAL DATA
2-2
©
200508
Pneumatic gearbox control
0
ΛΦ45/55 series
3
2.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Filter/governor
Selector valve single-H
Range-change cylinder
Bleed valve
Eaton switch button
(1) Use Loctite 243
M6 attachment bolts
13 Nm
Cover
25 Nm
M6 attachment bolts
22 Nm
M16 discharge valve attachment bolts
19 Nm
M8 cover plate attachment bolts
22 Nm
M8 cover attachment bolts
17 Nm
M16 nut on piston
105 Nm
Attachment
19 Nm
Attachment nut
70 Nm
©
200508
3-1
ZF S5-42 gearbox
TECHNICAL DATA
ΛΦ45/55 series
3
0
3. ZF S5-42 GEARBOX
3.1 GENERAL
Input shaft
Secondary shaft
Pre-tension
0.02 - 0.09 mm
Pre-tension
0.02 - 0.09 mm
TECHNICAL DATA
3-2
©
200508
ZF S5-42 gearbox
0
ΛΦ45/55 series
3
3.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Gearbox
Drive flange
Gearbox front cover
Selector shaft housing
Plugs
(1) Fit new nut and apply Loctite 270 to it
(2) Fit new nut and apply Loctite 262 to it
Attachment bolts
60 Nm
'Direct drive' attachment nut
400 Nm
Overdrive attachment nut
330 Nm
Attachment bolts
23 Nm
Selector shaft housing attachment bolts
23 Nm
Shifting arm lock nut
46 Nm
Gearbox control attachment nut
52 Nm
Bleeder
10 Nm
Oil level check/filler plug
50 Nm
Drain plug
50 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст