DAF LF45, LF55 Series. Manual — part 222
©
200508
8-3
Clutch
TECHNICAL DATA
ΛΦ45/55 series
3
0
8.3 FILLING CAPACITIES
Clutch
First filling
approx. 0.4 litres
TECHNICAL DATA
8-4
©
200508
Clutch
0
ΛΦ45/55 series
3
©
200508
9-1
Prop shafts
TECHNICAL DATA
ΛΦ45/55 series
3
0
9. PROP SHAFTS
9.1 GENERAL
Spicer
Monotron
LF 45
LF 55 (12 - 15 ton)
LF 55 (17 - 19 ton)
SPL 39
-
-
SPL 55
SPL 55
-
SPL 70
SPL 70
SPL 70
SPL 100
SPL 100
SPL 100
-
-
SPL 140
PEP 5
PEP 6
C2040
TECHNICAL DATA
9-2
©
200508
Prop shafts
0
ΛΦ45/55 series
3
9.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Drive flange
Spicer intermediate bearing
Spicer universal joint
Spicer suspension bearing
Monotron suspension bearing
M10 attachment bolts
60 Nm
M12 attachment bolts
105 Nm
SPL 39 and SPL 55 central nuts
400 Nm
SPL 70, SPL 100 and SPL 140 central nuts
685 Nm
5
/
16
" attachment bolts, UNF clamping bow, prop
shaft - universal joint
38 Nm
3
/
8
" attachment bolts, UNF clamping bow, prop
shaft - universal joint
70 Nm
M8 attachment bolts, clamping piece, universal
joint circlip SPL 140
38 Nm
Bracket attachment bolts
110 Nm + 30
″ angular displacement
M10 bracket attachment bolts
60 Nm
M12 bracket attachment bolts
105 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст