DAF LF45, LF55 Series. Manual — part 665

©

200419

5

Preface

PREFACE

DAF Trucks N.V. attaches great importance to optimal
After Sales Support.
In order to maintain and continue to optimise the high
standard of the service level, special tools will where
necessary be developed by DAF in addition to the
standard tools that are commercially available, for the
purpose of quality, efficiency, safety, etc.

This manual contains all the special tools released by
DAF for vehicle series F45, F55, F65, F75, F85, F95,
65CF, 75CF, 85CF, 95XF, LF45, LF55, CF65, CF75,
CF85 and XF95.
All parts contained in this manual can be ordered in the
manner as is usual for DAF parts.

If you have any remarks or suggestions concerning the
contents, structure or composition of this special tools
manual, we will be pleased to hear from you.

DAF TRUCKS
AFTER SALES PUBLICATIONS

6

©

200419

Preface

©

200419

7

Directions for use

DIRECTIONS FOR USE

The basic arrangement of the special tools manual is virtually the same as the arrangement of the
workshop manual.
Groups 1 to 9 contain the special tools for the respective main component.
Group 0 (General) contains universal special tools and special tools used in several groups.

Note:
If a special tool does not occur in the relevant section, look in group 0 (General).
The special tool in question is then one that occurs in several groups.

At the beginning of every group there is a table of contents containing the following columns

-

DAF code number

-

Relevant vehicle series

-

Relevant main components

-

Page number

If a tool is used for a main component or vehicle series, this is indicated by a code in the column (1-2-3-R).
This code has the following meaning:
1 - tool for carrying out maintenance work and repair work resulting from it.
2 - tool for frequently recurring work.
3 - tool for less frequently recurring work.
R - replacement part of a tool.

Explanations of the abbreviations used in the tables are:

i.c.w.

in combination with

A_1000/ 2000

Allison 1000/2000

TS12612

Twin Splitter 12612

E.PTO

Version with power take-off

HGS

Gearbox with Hydraulic Gear Shift

Voith-ret.

Version with Voith retarder

150_S/152_S/156_S/182_S/186_S

150N/152N/156N/182N/186N-shaft in disc brake version

150N/152N/156N/182N/186N

150N/152N/156N/182N/186N-shaft in dum brake version

09G075

Co-steering rear axle

09N075/09N220

Trailing rear axle in drum brake version

09N044

Leading rear axle (FTP vehicle type)

EMAS

Electro-hydraulic multi-axle steering

EVS

Electronic vehicle steering

RAS-EC

Rear axle steering - electronically controlled

ST_TRW

TRW steering boxes

ST_ZF

ZF steering boxes

8

©

200419

Directions for use