DAF CF65, CF75, CF85 Series . Manual — part 384
3
CF65/75/85 series
Inspection and adjustment
PTO
3-7
4.
Use a depth gauge to determine the
distance from the centring edge to the
gasket, distance B.
Calculate the axial play. The axial play
equals distance A -- distance B
5.
Compare the calculated value with the
maximum allowable axial play. See
“Technical data”.
6.
If necessary, adjust the axial play by means
of another shim (5).
B
V300231
13
ᓻ 200337
3
PTO
Inspection and adjustment
CF65/75/85 series
3-8
13
ᓻ 200337
3
CF65/75/85 series
Removal and installation
PTO
4-1
4. REMOVAL AND INSTALLATION
4.1 REMOVAL AND INSTALLATION, ENTIRE DAF ENGINE PTO ON FLYWHEEL
HOUSING
Removing entire DAF engine PTO on
flywheel housing
1.
If necessary, remove the prop shaft from the
PTO flange.
2.
Remove the banjo bolts from the
engine PTO oil pipes.
3.
If necessary, remove the electrical and air
connections of the engine PTO.
4.
Remove the attachment bolts of the entire
PTO on the flywheel housing.
5.
Remove the entire PTO from the flywheel
housing.
6.
Remove the PTO centring ring dowel pins
from the flywheel housing.
Installing entire DAF engine PTO on flywheel
housing
1.
Fit the PTO centring ring dowel pins in the
flywheel housing.
2.
Install the entire PTO on the flywheel
housing.
3.
Fit the attachment bolts and tighten them to
the specified torque. See “Technical data”.
4.
Install the oil pipes and banjo bolts and
tighten them to the specified torque. See
“Technical data”.
5.
If necessary, fit the electrical and air
connections of the engine PTO.
6.
If necessary, fit the prop shaft on the
PTO flange.
7.
Check the PTO operation.
13
ᓻ 200337
3
PTO
Removal and installation
CF65/75/85 series
4-2
4.2 REMOVAL AND INSTALLATION, DAF ENGINE PTO FLYWHEEL HOUSING
Removing DAF engine PTO flywheel housing
1.
Remove the gearbox.
2.
Remove the clutch release assembly and
the flywheel.
3.
Remove the PTO housing from the flywheel
housing.
4.
Remove the attachment bolt from the upper
drive sprocket in the flywheel housing.
5.
Suspend the engine in a hoist.
6.
Suspend the clutch housing in a hoist.
7.
Remove the engine bracket attachment
bolts.
8.
Remove the bolts attaching the flywheel
housing to the engine block.
9.
Remove the flywheel housing.
10. Remove the two drive sprockets from the
flywheel housing. Be aware of the mounting
position of the sprockets.
11. Remove the oil seal from the flywheel
housing.
Installing DAF engine PTO flywheel housing
1.
Fit a new oil seal in the flywheel housing.
2.
Fit the two drive sprockets into the flywheel
housing.
3.
Install the flywheel housing and tighten the
upper drive sprocket attachment bolt to the
specified torque. See “Technical data”.
4.
Fit the bolts attaching the flywheel housing
to the engine block and tighten them to the
specified torque. See “Technical data”.
13
ᓻ 200337
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст