DAF CF65, CF75, CF85 Series . Manual — part 1056
©
200424
1
Contents
TRAILING AXLES
ΧΦ65/75/85 series
8
8
8 Trailing axles
CONTENTS
Page
Date
Removal and installation, wheel hub unit (09N075 trailing axle) . . . . . . . . 2-1 . . . . . 200424
TRAILING AXLES
2
©
200424
Contents
8
ΧΦ65/75/85 series
8
©
200424
1-1
General
TRAILING AXLES
ΧΦ65/75/85 series
8
8
1. GENERAL
1.1 DESCRIPTION OF 09N075/09N220 TRAILING AXLE
Vehicles with a trailing axle are typically equipped
with a driven axle followed by a non-driven axle,
i.e. the trailing axle. If the axle load is so low that
this load can be carried by the driven axle only,
the trailing axle can be lifted.
The advantage of this is that tyres, brakes and
fuel are saved.
09N075 trailing axle
The 09N075 trailing axle is an air-suspended rigid
axle with a pneumatic lifting gear.
09N220 trailing axle
The 09N220 trailing axle can be either air-
suspended or leaf-sprung.
The air-suspended trailing axle is a rigid axle with
a pneumatic lifting gear.
With a leaf-sprung trailing axle, the driven rear
axle is suspended by spring assemblies which
are connected (hinged) at the front. On the other
side the spring assemblies are connected to the
trailing-axle wheel yoke using shackles. The lever
effect of the wheel yoke makes sure that the
trailing axle is also suspended. The trailing axle
may or may not be equipped with a hydraulic
lifting gear.
Wheel hub
The wheel hub, wheel bearings and hub oil seal
form a unit, also called the wheel hub unit (3). The
wheel bearings are a compact version.
The thrust washer (2) installed between the hub
nut (1) and wheel bearing, is fitted with two
straight surfaces on the inside to prevent the
washer from turning. This is to prevent the hub
nut (1) from loosening in case of wheel bearing
problems. The hub nut (1) is of the self-locking
type. The nut is locked by bending the lips on the
hub nut outward.
The wheel bearings of the wheel hub unit are
greased and are maintenance free.
The correct wheel bearing pre-load is achieved
by installing the hub nut as specified.
1
2
3
A8 00 356
TRAILING AXLES
1-2
©
200424
General
8
ΧΦ65/75/85 series
8
1.2 OVERVIEW DRAWING, 09N075 TRAILING AXLE HUB
6
5
2
1
4
3
7
9
8
A8 00 404
1.
Attachment bolt
2.
Hub cap
3.
O-ring
4.
Hub nut
5.
Thrust washer
6.
Wheel hub unit
7.
Wheel stud
8.
Wheel nut
9.
Wheel nut cap
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст