DAF CF65, CF75, CF85 Series . Manual — part 1097
©
200448
3-5
Disassembly and assembly
STABILISERS AND TORQUE RODS
ΧΦ65/75/85 series
9
4
3.3 DISASSEMBLY AND ASSEMBLY, MOUNTING RUBBERS
Disassembling mounting rubber
1.
Remove the circlip (1) and, if fitted, the
shim (2).
2.
Drive the pin and rubber bush unit (3) from
the torque rod housing (4).
Assembling mounting rubber
1.
Apply a thin film of acid-free petroleum jelly
or tyre grease to the rubber.
2.
Push the pin (3) into the housing (4). Make
sure that the bolt holes are parallel with the
torque rod.
3.
Fit the shim (2) (if removed earlier).
4.
Fit the circlip (1) as indicated. Ensure that the
circlip (1) is correctly fitted into the groove of
the housing.
4
2
1
3
W9 03 009
C9 00 298
STABILISERS AND TORQUE RODS
3-6
©
200448
Disassembly and assembly
4
ΧΦ65/75/85 series
9
©
200448
1
Contents
LEAF SUSPENSION
ΧΦ65/75/85 series
9
5
5 Leaf suspension
CONTENTS
Page
Date
Overview drawing, single-axle suspension with bolt attachment. . . . . . . . 2-4 . . . . . 200448
Overview drawing, single-axle suspension with pin attachment . . . . . . . . 2-5 . . . . . 200448
Removal and installation, bearing bush of pin attachment . . . . . . . . . . . . 3-10 . . . . 200448
LEAF SUSPENSION
2
©
200448
Contents
5
ΧΦ65/75/85 series
9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст