DAF CF65, CF75, CF85 Series . Manual — part 354
3
CF65/75/85 series
Description of components
CLUTCH
3-13
3.8 THRUST BEARING
The
CF65/75/85-series has two versions of
thrust bearing, one with and one without plastic
coating.
The thrust bearing without plastic coating can be
recognised by the aluminium lining on the inner
diameter.
V300288
The thrust bearing with plastic coating can be
recognised by the spline-shaped inner diameter.
When fitting the thrust bearing with
plastic coating, do not use
lubricating grease.
The lubricating grease will attack
the plastic coating and shorten the
service life of the thrust bearing.
V300173
10
ᓻ 200337
3
CLUTCH
Description of components
CF65/75/85 series
3-14
10
ᓻ 200337
3
CF65/75/85 series
Inspection and adjustment
CLUTCH
4-1
4. INSPECTION AND ADJUSTMENT
4.1 INSPECTION AND ADJUSTMENT, CLUTCH PEDAL
Inspection, clutch pedal
1.
Check the total travel (D) of the clutch
pedal: see “Technical data”.
2.
Check the free travel (B) of the clutch pedal:
see “Technical data”. The free travel (B) can
be clearly felt by manually depressing the
clutch pedal in from its rest position.
Adjustment, clutch pedal
1.
Use the adjusting screw (1) to adjust the
total travel (D): see “Technical data”.
V300315
C
D
B
1
A
ᓻ 200337
10
3
CLUTCH
Inspection and adjustment
CF65/75/85 series
4-2
2.
The free travel (B) of the clutch pedal is set
indirectly by loosening the lock nut (2) and
then screwing the ball joint (1) into or out of
the thrust pin (3). This sets the distance (E)
between the thrust pin (3) and the piston (4)
in the main cylinder: see “Technical data”.
V300411
1
E
2
3
4
5
6
7
10
ᓻ 200337
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст