DAF CF65, CF75, CF85 Series . Manual — part 1119
©
200518
1-3
Maintenance intervals
MAINTENANCE SCHEDULE
ΧΦ65/65 (II) series
4
X service
This is the symbol for an X service.
An X service is a mileage-dependent
maintenance check which consists of changing
the engine oil plus a number of visual inspections.
Note:
An X service must be carried out at least once a
year.
Y service
This is the symbol for a Y service.
A Y service is an annual maintenance check
consisting of several maintenance activities plus
changing of the gearbox and rear axle oil.
Note:
If the prescribed oil specification (see
specification manual "Fluids and lubricants") is
complied with, an extended changing interval
may be applied.
Automatic gearboxes are subject to different
changing intervals.
G000086
+
X service
G000087
+
1x per YEAR
Y service
(1)
Automatic Allison gearbox
Maintenance group I
Standard changing interval 1 year/maximum
40,000 km
Extended changing interval 3 years/maximum
80,000 km
Maintenance group II
Standard changing interval 1 year/maximum
40,000 km
Extended changing interval 3 years/maximum
160,000 km
Maintenance group III
Standard changing interval 1 year/maximum
40,000 km
Extended changing interval 3 years/maximum
160,000 km
MAINTENANCE SCHEDULE
1-4
©
200518
Maintenance intervals
4
ΧΦ65/65 (II) series
1.3 EFFECT OF DIESEL FUEL AND PTO HOURS ON MAINTENANCE INTERVALS
Diesel fuels
PTO hours
PTO hours should be converted into mileage
according to the following formula:
1 PTO hour = 40 km
1.4 MAINTENANCE IN SPECIAL OPERATING CONDITIONS
Contact a DAF dealer/main branch or importer for
vehicles used in very specific or heavy
conditions.
The service intervals can be modified, if
necessary, in consultation with the dealer/main
branch or importer to fit the appropriate operating
conditions.
1.5 FIRST SERVICE INSPECTION
The first service inspection should be carried out
between the first 7,500 and 10,000 km or at most
8 weeks after delivery of the vehicle, whichever
comes first.
Note:
If the vehicle is fitted with a clutch wear indicator,
a mark (centre punch) should be made in the
wear indicator cover.
The mark should be placed exactly opposite the
middle of the indicator.
This mark is necessary to allow clutch wear to be
evaluated.
Sulphur content
Engine oil change interval
> 0,2%
Halve interval to max. of 25,000 km
©
200518
2-1
Maintenance activities
MAINTENANCE SCHEDULE
ΧΦ65/65 (II) series
4
2. MAINTENANCE ACTIVITIES
2.1 OVERVIEW OF MAINTENANCE ACTIVITIES FOR THE FIRST SERVICE
INSPECTION
O Adjust clutch wear indicator mark
O Change the oil filters on automatic gearbox
MAINTENANCE SCHEDULE
2-2
©
200518
Maintenance activities
4
ΧΦ65/65 (II) series
2.2 OVERVIEW OF ANNUAL MAINTENANCE ACTIVITIES
ANNUAL MAINTENANCE ACTIVITIES (Y-SERVICE)
"Correct, if necessary, after inspection"
CAB AND ELECTRICAL SYSTEM
O Check pedal rubbers
O Check whether the latest version of the ITS manual is kept in the cab
O Replace interior filter element
O Check fluid level of cab tilting pump
O Check cab fastening
ENGINE, COOLING SYSTEM AND FUEL SYSTEM
O Replace air filter element
O Check air inlet dust trapping valve
O Check/adjust valve clearance - see Note 4
Done
O Yes O No
O Check coolant freezing point
O Change coolant - see Note 1
Changed
O Yes O No
O Change fuel fine filter
STEERING GEAR AND BRAKE SYSTEM
O Replace steering gear filter element - see Note 5
Replaced
O Yes O No
O Check steering ball joints
O Replace air dryer filter element
O Check compressor line - See Note 6
O Check brake cylinder fastening
O Check/adjust load-dependent control valve
O Check fastening of universal joint to steering box input shaft
DRIVE AND CHASSIS
O Change differential oil - See Note 2
Changed
O Yes O No
O Check operation of differential lock
O Check drive shaft play
O Change gearbox oil - see Note 3
Changed
O Yes O No
O Check trailer coupling
O Check superstructure attachment
OTHER ACTIVITIES
O Check whether there are any field actions that still need to be performed on the vehicle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст