DAF CF65, CF75, CF85 Series . Manual — part 258
©
200324
4-35
Removal and installation
XE ENGINE
CF65/75/85 series
2
8
4.26 REMOVAL AND INSTALLATION, TIMING CASE
Removing the timing case
1.
Remove the timing gears.
2.
Remove the air compressor.
3.
Remove the steering pump.
4.
Remove the camshaft attachment bolts and
locking plate.
5.
Loosen the oil sump attachment bolts until
the oil sump is free from the timing case.
6.
Remove the bolts attaching the timing case
to the cylinder block, and remove the timing
case.
Installing the timing case
1.
Remove any remnants of gasket. Clean and
inspect the sealing surfaces, dowels and
locating holes.
2.
To position the gasket, insert three studs and
fit the new gasket.
3.
Then remove any gasket remnants between
the cylinder block and the oil sump.
4.
Fit the timing case. Tighten the attachment
bolts to the specified torque. See "Technical
data".
M200954
2
4
15
14
5
7
1
8
9
3
11
10
12
13
6
M200579
XE ENGINE
4-36
©
200324
Removal and installation
8
CF65/75/85 series
2
5.
Tighten the oil sump attachment bolts to the
specified torque. See "Technical data".
6.
Fit the camshaft locking plate and
attachment bolts. Tighten the attachment
bolts to the specified torque. See "Technical
data".
7.
Fit the timing gears.
8.
Fit a new O-ring to the air compressor and fit
the air compressor.
9.
Fit the steering pump.
©
200324
4-37
Removal and installation
XE ENGINE
CF65/75/85 series
2
8
4.27 REMOVAL AND INSTALLATION, TIMING CASE OIL SEAL
Removing the timing case oil seal
1.
Position cylinder 1 at top dead centre (TDC
on the flywheel, cylinder 6 in overlap
position).
2.
Remove the idler gear.
3.
Remove the pump housing camshaft gear (1).
4.
Remove the oil seal (2) by tapping it from the
timing case in the driving direction.
M201185
1
3
5
6
2 7
4
M200887
M200728
XE ENGINE
4-38
©
200324
Removal and installation
8
CF65/75/85 series
2
Installing the timing case oil seal
1.
Fit a dry new timing case oil seal (2) using
the special tool (DAF no. 1329318).
2.
Fit the pump housing camshaft gear (1).
3.
Fit the idler gear.
Note:
Remember the marks.
4.
Fit the timing cover.
1
3
5
6
2 7
4
M200887
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст