DAF CF65, CF75, CF85 Series . Manual — part 277
0
3
CF65/75/85 series
Pneumatic section of gearbox
TECHNICAL DATA
3-3
GEAR LEVER SELECTOR VALVE
Range-change gear and splitter
Connection point
Colour
1
Supply
Black
3
Bleed
Red
21
Range-change gear
command (A)
White
22
Splitter command (B)
Yellow
V300489
21
1
22
B
A
3
PNEUMATIC SYMBOL
Range-change gear and splitter
Position
Function
GP
Range-change gear
GV
Splitter
1
22
21
GV
GP
H
L
H
L
V300161
ᓻ 200337
3
TECHNICAL DATA
Pneumatic section of gearbox
CF65/75/85 series
3-4
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques.
Any other threaded connections that are
not specified must therefore be tightened to the
torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed unless stated otherwise.
Gear button on gear lever
Gear button lock nut
70 Nm
0
ᓻ 200337
0
3
CF65/75/85 series
ZF 6S-850 gearbox
TECHNICAL DATA
4-1
4. ZF 6S-850 GEARBOX
4.1 GENERAL
Gearbox type
Each gearbox has a type-plate attached to it,
indicating the type of gearbox. This data is also
stated on the identity card of the relevant
vehicle.
ZF gearbox type-plate
1.
Type of gearbox
2.
Series no. (ZF)
3.
Parts list (ZF)
4.
Specification no.
5.
Pulse generator ratio
6.
Gearbox ratio
7.
Engine speed using PTO
8.
PTO speed
9.
Gearbox oil capacity
10. Oil specification
V300049
1
2
4
5
3
8
6
7
10
9
Output shaft bearing axial play
Output shaft bearing axial play
0.00 - 0.10 mm
Bearing axial play, main and input shafts
Bearing axial play, main and input shafts
0.00 - 0.10 mm
Auxiliary shaft bearing axial play
Auxiliary shaft bearing axial play
0.00 - 0.10 mm
ᓻ 200337
3
TECHNICAL DATA
ZF 6S-850 gearbox
CF65/75/85 series
4-2
4.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques.
Any other threaded connections that are
not specified must therefore be tightened to the
torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed unless stated otherwise.
Gearbox to engine
M8 attachment bolts - 10.9
30 Nm
M10 attachment bolts - 10.9
60 Nm
M12 attachment bolts - 10.9
110 Nm
Drive flange
Drive flange attachment bolt
-
120 mm flange diameter
140 Nm
-
150 mm flange diameter
140 Nm
Gearbox front cover
Attachment bolts
23 Nm
Selector shaft housing
Attachment bolts
23 Nm
Shifting arm lock nut
46 Nm
Air connection banjo bolt
23 Nm
Bleeder
10 Nm
Plugs
Drain plug
50 Nm
Level check/filler plug
50 Nm
4.3 FILLING CAPACITIES
Gearbox type
Filling capacities at oil change
(litres)
First filling, e.g. during repair
(litres)
ZF 6S-850
7.5
7.5
0
ᓻ 200337
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст