DAF CF65, CF75, CF85 Series . Manual — part 1150
©
200423
1-1
Maintenance intervals
MAINTENANCE SCHEDULE
ΧΦ75 series
4
1. MAINTENANCE INTERVALS
1.1 MAINTENANCE SCHEDULE
The service intervals stated in the
maintenance schedule are based on use of
the oils and fuels specified by DAF.
+
+
Maintenance
schedule
CF75
1x per YEAR
G000233
Intermediate X service
Y service
30.000 km
50.000 km
75.000 km
30.000 km
37.500 km
50.000 km
60.000 km
75.000 km
1 year
max. 100.000 km
1 year
max. 100.000 km
1 year
max. 150.000 km
3 year
max. 180.000 km
3 year
max. 300.000 km
3 year
max. 450.000 km
1 year
max. 100.000 km
1 year
max. 100.000 km
1 year
max. 200.000 km
2 year
max. 120.000 km
3 year
max. 300.000 km
3 year
max. 450.000 km
100.000 km
inspection
Ext.
Ext.
Ext.
(1)
(4)
(3)
(2)
(2)
(1)
Automatic gearboxes are subject to different
changing intervals; see maintenance schedule
notes.
(2)
Extended changing intervals not permitted on 1354
and 1355(T) rear axles.
(3)
1 year/maximum 150,000 km for:
- 1132 and 1339 rear axles
1 year/maximum 100,000 km for:
- 1132(T), 1354 and 1355(T) rear axles
(4)
3 years/maximum 300,000 km for:
- 1132(T) rear axle
Extended changing intervals not permitted on 1354
and 1355(T) rear axles.
MAINTENANCE SCHEDULE
1-2
©
200423
Maintenance intervals
4
ΧΦ75 series
1.2 EXPLANATORY NOTES ON THE MAINTENANCE SCHEDULE
Maintenance group classification
Depending on the use to which the vehicle is
put, the vehicle is placed in maintenance group I,
II or III.
Maintenance group I
Operation on building sites, in quarries, etc.
-
Operation on unmetalled roads
-
Traffic in dusty conditions
-
Sanitation department vehicles
-
Distribution transport with an annual mileage
of up to 30,000 km.
Maintenance group II
Urban and regional transport
-
Distribution traffic in urban areas
-
Traffic between adjacent villages/cities
Maintenance group III
(Inter)national traffic
-
Long-distance/very long-distance traffic
Standard changing interval
This is the standard changing interval symbol.
See the "Fluids and lubricants" specifications
manual for the prescribed oil specification.
Extended changing interval
This is the extended changing interval symbol.
If the prescribed oil specification and any
additional conditions (see specification manual
"Fluids and lubricants") are complied with, an
extended changing interval may be applied.
Note:
An extended changing interval for engine oil may
be subject to additional conditions. These
additional conditions are included in the "Fluids
and lubricants" specification manual.
G0 00 230
Ext.
G0 00 229
©
200423
1-3
Maintenance intervals
MAINTENANCE SCHEDULE
ΧΦ75 series
4
Intermediate inspection
This is the intermediate inspection symbol.
Intermediate inspections are based on several
visual inspections.
When an extended changing interval is
applicable to the engine oil (X-service), an
intermediate inspection should be carried out.
X-service
This is the symbol for an X-service.
An X-service is a mileage-dependent
maintenance check which consists of changing
the engine oil plus a number of visual inspections.
Note:
If the prescribed oil specification and additional
conditions (see specification manual "Fluids and
lubricants") are met, an extended changing
interval (X-service) may be applied.
-
An X-service must be carried out at least
once a year.
Y-service
This is the symbol for a Y-service.
A Y-service is an annual maintenance check
consisting of several maintenance activities plus
changing of the gearbox and rear axle oil.
Note:
-
If the prescribed oil specification (see
specification manual "Fluids and lubricants")
has been met, an extended changing interval
may be applied.
-
Automatic gearboxes are subject to different
changing intervals.
G000088
Intermediate
inspection
G000086
+
X service
G000087
+
1x per YEAR
Y service
(1)
Automatic Allison gearbox
Maintenance group I
Standard changing interval 1 year/maximum 40,000 km
Extended changing interval 3 years/maximum 80,000 km
Maintenance group II
Standard changing interval 1 year/maximum 40,000 km
Extended changing interval 3 years/maximum 160,000 km
Maintenance group III
Standard changing interval 1 year/maximum 40,000 km
Extended changing interval 3 years/maximum 160,000 km
MAINTENANCE SCHEDULE
1-4
©
200423
Maintenance intervals
4
ΧΦ75 series
1.3 EFFECT OF DIESEL FUEL AND PTO HOURS ON MAINTENANCE INTERVALS
Diesel fuels
PTO hours
PTO hours should be converted into mileage
according to the following formula:
1 PTO hour = 40 km
1.4 MAINTENANCE IN SPECIAL OPERATING CONDITIONS
Contact a DAF dealer/main branch or importer for
vehicles used in very specific or heavy
conditions.
The service intervals can be modified, if
necessary, in consultation with the dealer/main
branch or importer to fit the appropriate operating
conditions.
1.5 FIRST SERVICE INSPECTION
The first service inspection should be carried out
between the first 7,500 and 10,000 km or at most
8 weeks after delivery of the vehicle, whichever
comes first.
Note:
If the vehicle is equipped with a clutch wear
indicator, ensure that the lock nut makes contact
with the servo housing.
If necessary, make sure that the lock nut makes
contact with the housing.
The oil for the 1355 (T) axle must be renewed
between the 2,000 and 3,000 km.
Sulphur content
Engine oil change interval
> 0,2%
Halve interval to max. of 25,000 km
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст