DAF CF65, CF75, CF85 Series . Manual — part 500
5
CF65/75/85 series ≥0E621376
Contents
REPAIRING WIRING
1
CONTENTS
Page
Date
1. GENERAL
1-1
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
1.1
Connector
1-1
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
1.2
Contact
1-2
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
1.3
Contact kits
1-3
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2. REMOVAL AND INSTALLATION
2-1
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.1
Removal and installation, connectors
2-1
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.2
Removal and installation, contacts
2-2
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.3
Fitting contacts to electrical wires
2-8
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
2.4
Fitting a SCAT seal
2-15
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
2.5
Fitting an electrical buffer connection
2-16
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
2.6
Removal and installation, earth wire
2-19
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
2.7
Repairing CAN network wiring
2-20
200404
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
3
200404
5
REPAIRING WIRING
Contents
CF65/75/85 series ≥0E621376
2
200404
3
5
CF65/75/85 series ≥0E621376
General
REPAIRING WIRING
1-1
1. GENERAL
The increasing application of electronics in
vehicles means a much broader range of
connectors, contacts and wiring is being used.
Be sure to pay special attention to this during
repairs, so as to avoid unnecessary faults.
1.1 CONNECTOR
A connector is a removable connection between
two or more electrical wires or components. The
female contacts are on one side and the male
contacts on the other side. This way they can be
connected and disconnected.
The connector should protect the contacts
against unwanted electrical connections and
external influences. It also ensures the proper
connection of the applicable contacts.
3
200404
5
REPAIRING WIRING
General
CF65/75/85 series ≥0E621376
1-2
1.2 CONTACT
A connector has one or more contacts. These
contacts are available in various sizes and
models.
However, they all have the same design:
The mating part (1) enables the electrical
connection between the contacts.
The contact press part (2) is the electrical
connection between the stripped part of the wire
and the contact.
The relief part (or pull relief) (3) relieves the
contact press part from mechanical wear. The
insulation relief is placed over the insulating
sheath and/or the SCAT.
E501479
1
3
2
With contacts, three dimensions are important:
the diameter (1) of the wire to be connected, the
size of the contact press part (2), which is linked
to the wire diameter, and the size of the mating
part (3).
E501504
2
1
200404
3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст