DAF CF65, CF75, CF85 Series . Manual — part 1047
©
200424
3-13
Removal and installation
TANDEM REAR AXLE 1132T
ΧΦ65/75/85 series
8
6
Do not come near the selector sleeve
when de-aerating the differential
lock.
5.
Pressurise the air connection of the
differential lock. Fit special tool (A)
(DAF no. 1329447), so that the differential
lock is blocked.
6.
Install the differential.
A8 00 346
A
}
TANDEM REAR AXLE 1132T
3-14
©
200424
Removal and installation
6
ΧΦ65/75/85 series
8
©
200424
4-1
Draining and filling
TANDEM REAR AXLE 1132T
ΧΦ65/75/85 series
8
6
4. DRAINING AND FILLING
4.1 DRAINING AND FILLING, HUB
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the hub
1.
Position the vehicle on a level surface.
2.
Position the wheels so that the level check/
filler plug (A) is at the underside.
3.
Remove the level check/filler plug (A) and
drain the oil.
Filling the hub
1.
Position the vehicle on a level surface.
2.
Position the wheels so that the level check/
filler plug (A) is on the top.
3.
Fill the hub with the specified quantity of oil.
See "Technical data".
4.
Check the oil level after approximately
5 minutes. See "Inspection and adjustment".
5.
Fit the plug using the special Torx wrench
(DAF no. 1329493) and tighten to the
specified torque; see "Technical data".
}
M8010
A
TANDEM REAR AXLE 1132T
4-2
©
200424
Draining and filling
6
ΧΦ65/75/85 series
8
4.2 DRAINING AND FILLING, DIFFERENTIAL
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the differential, first axle
1.
Position the vehicle on a level surface.
2.
Remove the level check/filler plug (A) and
drain plug (B). Drain the oil.
3.
Fit the drain plug (B) using the special Torx
wrench (DAF no. 1329493) and tighten to
the specified torque; see "Technical data".
Filling the differential
1.
Fill the differential via the level check/filler
plug (A) with the specified quantity of oil, see
"Technical data".
2.
Check the oil level after approx. 5 minutes.
The oil level should now have reached the
level check/filler opening. See 'Inspection
and adjustment".
3.
Fit the level check/filler plug (A) using the
special Torx wrench (DAF no. 1329493) and
tighten to the specified torque; see
"Technical data".
Draining the differential, second axle
1.
Position the vehicle on a level surface.
2.
Remove the level check/filler plug (A) and
drain plug (B). Drain the oil.
3.
Fit the drain plug (B) using the special Torx
wrench (DAF no. 1329493) and tighten to
the specified torque; see "Technical data".
Filling the differential
1.
Fill the differential via the level check/filler
plug (A) with the specified quantity of oil, see
"Technical data".
2.
Check the oil level after approx. 5 minutes.
The oil level should now have reached the
level check/filler opening. See 'Inspection
and adjustment".
3.
Fit the level check/filler plug (A) using the
special Torx wrench (DAF no. 1329493) and
tighten to the specified torque; see
"Technical data".
}
M8013
A
B
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст