DAF CF65, CF75, CF85 Series . Manual — part 1071
©
200424
5-9
Disassembly and assembly
HYDRAULIC LIFTING GEAR
ΧΦ65/75/85 series
8
9
19. Fit the spring clip (6) into the cylinder. Make
sure that the entire circlip is positioned
correctly in the groove.
20. Pull back the piston-rod guide (10) using the
piston rod, until the piston-rod guide is in
contact with the spring clip (6).
21. Install the O-ring (5).
22. Install the circlip (4). Make sure that the
entire circlip is positioned correctly in the
groove.
23. Install one of the circlips (1) and press a new
bearing (2) into the eye.
24. Install the second circlip (1).
25. Check the cylinder for internal and external
leakage, see chapter "Inspection and
adjusting".
11 12
3 4 5 6
8 9
A
10
7
A8 00 285
HYDRAULIC LIFTING GEAR
5-10
©
200424
Disassembly and assembly
9
ΧΦ65/75/85 series
8
©
200424
6-1
Draining and filling
HYDRAULIC LIFTING GEAR
ΧΦ65/75/85 series
8
9
6. DRAINING AND FILLING
6.1 FILLING THE HYDRAULIC LIFTING GEAR
1.
Make sure that the trailing axle wheels are
fully lowered and on the ground.
2.
Fill the reservoir with the specified oil up to
the "max." level mark.
3.
Lift the trailing axle and top up oil to the
"min." level mark, if necessary.
4.
Lower the trailing axle and, once again,
check the level. Top up oil to the "max." level
mark, if necessary.
HYDRAULIC LIFTING GEAR
6-2
©
200424
Draining and filling
9
ΧΦ65/75/85 series
8
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст