Honda HR-V (2023 year). Manual in english — page 5
99
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Adaptive Cruise
Control (ACC)
with Low Speed
Follow Indicator
(Amber)
●
Comes on if there is a problem with ACC
with Low Speed Follow.
●
Comes on while driving
- Have your vehicle
checked by a dealer.
●
Indicator may come on temporarily when the
Maximum Load Limit is exceeded.
●
ACC with Low Speed Follow has been
automatically canceled.
●
Make sure the total load is within the Maximum
Load Limit.
2
●
Stays on constantly
- Have your vehicle checked
by a dealer.
●
Comes on if the ACC with Low Speed Follow
is deactivated temporarily after the battery
has been disconnected, then re-connected.
●
Drive a short distance at more than 12 mph (20
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Adaptive Cruise
Control (ACC)
with Low Speed
Follow Indicator
(White/Green)
●
Lights up in white when you press the
button.
●
Lights up in green when you press the
RES/+/SET/−
switch up or down.
2
Adaptive Cruise Control (ACC) with Low
Speed Follow
P. 471
Cruise Mode
Indicator (White/
Green)
●
Lights up in white when you change to
cruise mode.
●
Lights up in green when you have set a
speed for cruise control.
2
100
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
●
Comes on if there is a problem with the
LKAS.
●
Stays on constantly
- Have your vehicle checked
by a dealer.
●
Indicator may come on temporarily when the
Maximum Load Limit is exceeded.
●
Make sure the total load is within the Maximum
Load Limit.
2
●
Stays on constantly
- Have your vehicle checked
by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(White/Green)
●
Lights up in white when you press the LKAS
button.
●
Lights up in green when the LKAS is in
operation.
2
101
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Safety Support
Indicator (Amber)
●
Comes on if there is a problem with Road
Departure Mitigation system, CMBS
TM
, Low
Speed Braking Control
*
, or blind spot
information system
*
.
●
Stays on constantly
- Have your vehicle checked
by a dealer.
●
Comes on if there is a problem with the
parking sensor.
●
Check if the area around the sensor(s) is covered
with mud, ice, snow, etc. if the indicator stays on
even after you clean the area, have the system
checked by a dealer.
●
Indicator may come on temporarily when the
Maximum Load Limit is exceeded.
●
Make sure the total load is within the Maximum
Load Limit.
2
●
Stays on constantly
- Have your vehicle checked
by a dealer.
●
Comes on if the Road Departure Mitigation
system, Low Speed Braking Control
*
and
CMBS
TM
are deactivated temporarily after
the battery has been disconnected and then
re-connected.
●
Drive a short distance at more than 12 mph (20
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Models with Parking Sensor System
* Not available on all models
102
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Safety Support
Indicator (Amber)
●
Comes on when Road Departure Mitigation
system and/or CMBS
TM
shuts itself off.
●
Stays on
- The temperature inside the camera is
too high.
Use the climate control system to cool down the
camera.
The system activates when the temperature inside
the camera cools down.
2
●
Stays on
- The area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place
and wipe the debris off with a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message are still displayed even after
you have cleaned the area around the camera.
2
●
It may come on when the ambient conditions are
dark, such as when driving in a tunnel, or at night,
dawn, or dusk.
103
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Safety Support
Indicator (Amber)
●
Comes on when mud, snow, or ice
accumulates in the vicinity of sonar sensor.
●
Remove the obstacle in the vicinity of sonar sensor.
2
P. 465
●
Comes on when mud, snow, or ice
accumulates in the vicinity of the blind spot
information system sensor.
●
Comes on when the temperature of the
blind spot information system sensor is high.
●
Comes on while driving
- Something may be
interfering with the blind spot information system
sensor. Check the vicinity of the blind spot
information system sensor and remove any
obstacles.
●
The system will return to normal when the
temperature cools down.
2
Safety Support
Indicator (Green/
Gray)
●
Lights up in green when Road Departure
Mitigation system, CMBS
TM
, Low Speed
Braking Control
*
, Parking Sensor System
*
,
and blind spot information system
*
are on.
●
Lights up in green and gray when Road
Departure Mitigation system, CMBS
TM
, Low
Speed Braking Control
*
, Parking Sensor
System
*
, or blind spot information system
*
,
or any two, three or four of these systems
are off.
●
Lights up in gray when Road Departure
Mitigation system, CMBS
TM
, Low Speed
Braking Control
*
, Parking Sensor System
*
,
and blind spot information system
*
are off.
2
Road Departure Mitigation System
2
Collision Mitigation Braking System
P. 453
2
2
P. 465
2
P. 538
Models with Low Speed Braking Control
Models with blind spot information system
* Not available on all models
104
In
strum
e
nt Pa
nel
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, fuel gauge, and other related indicators.
They are displayed when the power mode is in ON.
Displays your driving speed in mph or km/h.
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
■
Speedometer
■
Tachometer
■
Fuel Gauge
1
You can change the Speed/Distance Units.
2
P. 122
2
P. 123
2
P. 345
1
The tachometer can be turned on and off using the
driver information interface or audio/information
screen.
2
P. 123
2
P. 345
1
NOTICE
You should refuel when the reading approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
* Not available on all models
Continued
105
uu
Gauges and Driver Information Interface
u
Gauges
In
strum
e
nt Pa
nel
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows certain detected traffic signs while driving.
The indicator blinks when the maximum speed of the traffic sign detected by the
Traffic Sign Recognition System is exceeded.
2
Traffic Sign Recognition System
P. 519
■
Odometer
■
Outside Temperature
■
Traffic Sign Recognition System
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
You can adjust the temperature reading.
2
2
P. 345
* Not available on all models
106
uu
Gauges and Driver Information Interface
u
Gauges
In
strum
e
nt Pa
nel
Shows the current mode for ACC with Low Speed Follow, LKAS, and Traffic Jam
Assist
*
.
2
Adaptive Cruise Control (ACC) with Low Speed Follow
P. 471
2
Lane Keeping Assist System (LKAS)
P. 491
2
Shows the clock.
You can adjust the time manually and change the clock display to show the 12 hour
clock or 24 hour clock.
2
P. 134
■
Current Mode for ACC with Low Speed Follow, the LKAS, and
Traffic Jam Assist
*
■
Clock
* Not available on all models
107
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Driver Information Interface
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
When a warning message displays, please check the message and contact a dealer
and have the vehicle inspected if necessary. Please refer to the pages below if the
Engine oil pressure low
or
Engine temperature too hot
message is displayed.
2
If the Engine oil pressure low Warning Appears
P. 622
2
P. 620
■
Accessing contents in the display
Press the
(home) button, then roll the left selector wheel to scroll to the content
you want to see. Press the left selector wheel to see detailed information.
■
Switching the Display
1
You can add or delete the meter contents.
2
P. 121
108
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
Customize
display
P. 121
Left Selector
Wheel
(home) Button
Roll the left
selector wheel.
No content
P. 122
Speed & time
P. 111
Warnings
P. 122
Range & fuel
P. 109
Settings
*
P. 123
Driver
attention
P. 114
Seat belts
P. 118
Safety
Support
P. 118
Maintenance
P. 118
Phone
*
P. 112
Audio
*
P. 112
Navigation
*
P. 113
AWD torque
distribution
*
P. 117
Brightness
P. 120
* Not available on all models
109
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Roll the left selector wheel to switch between trip meter A and trip meter B.
■
Range/Fuel/Trip Meter
Average Fuel Economy
Range
Trip Meter B
Instant Fuel Economy
Trip Meter A
uu
Gauges and Driver Information Interface
u
Driver Information Interface
110
In
strum
e
nt Pa
nel
■
Trip meter
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press the left selector wheel and then select
Reset
.
u
The trip meter is reset to 0.0.
■
Average Fuel Economy
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
■
Instant Fuel Economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
■
Range
Shows the estimated distance you can travel on the remaining fuel. This estimated
distance is based on the vehicle’s current fuel economy.
1
You can change when to reset the average fuel
economy.
2
P. 123
2
P. 345
1
The driving range displayed is only an estimate and
may differ to the actual distance the vehicle can
travel.
* Not available on all models
111
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Roll the left selector wheel to switch between trip meter A and trip meter B.
■
Speed/Time/Trip Meter
Trip Meter B
Average Speed
Trip Meter A
Elapsed Time
uu
Gauges and Driver Information Interface
u
Driver Information Interface
112
In
strum
e
nt Pa
nel
■
Trip meter
2
■
Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
■
Average speed
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Shows the current audio information.
2
P. 244
Shows the current phone information.
2
P. 389
■
Audio
*
■
Phone
*
1
You can change when to reset the elapsed time.
2
P. 123
2
P. 345
1
You can change when to reset the average speed.
2
P. 123
2
P. 345
* Not available on all models
Continued
113
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Compass
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the navigation system
*
, Android Auto or
Apple CarPlay, turn-by-turn directions to your destination appear.
2
Refer to the Navigation System Manual
2
2
P. 301
■
Navigation
*
1
You can select whether to have the turn-by-turn
display come on or not during the route guidance.
2
P. 345
Turn-by-turn directions may not be available for all
apps.
When the compass or turn-by-turn directions are
displayed, you can control some navigation system
functions on the driver information interface by
scrolling the left selector wheel.
2
Refer to the Navigation System Manual
Models with navigation system
* Not available on all models
uu
Gauges and Driver Information Interface
u
Driver Information Interface
114
In
strum
e
nt Pa
nel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select
Driver attention
on the
driver information interface, bars on it light up
in white to indicate the degree of the driver’s
attention.
2
Accessing contents in the display
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information
Interface
Left Selector
Wheel
(home) Button
Level
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст