Honda Accord Hybrid (2019 year). Instruction — part 8
112
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the automatic brake hold is automatically
canceled while it is in operation.
• Immediately depress the brake pedal.
• Appears when the automatic brake hold system is
turned off.
• Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
• Fasten the driver’s seat belt.
• Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
• Press the automatic brake hold button with the brake
pedal depressed.
113
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 545
2 Parking Brake P. 540
• Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
• Press the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 540
• Appears after you set the power mode to
ACCESSORY or ON.
• Appears after you unlock and open the driver’s
door.
2 Turning on the Power P. 458
Canadian models
114
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the power mode is in ACCESSORY.
—
• Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
• Press the POWER button twice with your foot off the
brake pedal to change the power mode to VEHICLE
OFF.
• Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
• Disappears when you bring the smart entry remote
back inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 190
• Appears when the smart entry remote battery
becomes weak.
• Replace the battery as soon as possible.
115
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the smart entry remote battery is too
weak to turn on the power system or the key is not
within operating range to turn on the power system.
A beeper sounds six times.
• Bring the smart entry remote in front of the POWER
button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 639
• Appears as soon as a problem is detected in the
smart entry system or push button starting system.
• Appears constantly - Have your vehicle checked by a
dealer.
• Appears if you press the POWER button while the
vehicle is moving.
• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
116
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if the vehicle is being driven in a manner
consistent with drowsy or inattentive driving.
117
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
• When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(
P before
releasing the brake pedal.
• Appears when you put the transmission into
(
N,
then release the
(
N button.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 469
118
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you try to change the shift position
without releasing your foot off the accelerator pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Appears when the
(
P button is pressed while the
vehicle is moving.
• Appears if you put the transmission into
(
R while
the vehicle is moving forward, or into
(
D while the
vehicle is reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Appears when you set the power mode to ON
without fastening the driver’s seat belt.
• Appears when you change the shift position after
(
P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 467
• Appears when you try to change the shift position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
119
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if you depress the accelerator pedal when
the transmission is in
(
N.
• Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
• Appears when the shift is repeatedly changed
between
(
P and any other position.
• Wait for a while then change the shift position.
• Appears when you press and hold
(
N button for
more than two seconds.
• Disappears when you set the shift position to a shift
other than
(
N.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 469
120
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the automatic
lighting control system.
• Appears while driving - Manually turn the lights on,
and have your vehicle checked by a dealer.
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
• Appears if there is a problem with the parking sensor
system.
• Check if the area around the sensor(s) is covered with
mud, ice, snow, etc. If the indicator(s) stays on or the
beeper does not stop even after you clean the area,
have the system checked by a dealer.
• Appears if there are obstacles around the sensors.
• Check for obstacles near your vehicle to make sure it is
safe to park.
Models with parking sensor system
Models with parking sensor system
121
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch, and have your
vehicle checked by a dealer.
• If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.
• Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor cover.
2 Radar Sensor P. 539
2 Honda Sensing® P. 491
• Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
• Use the climate control system to cool down the camera.
• Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195
• Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195
122
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when ACC with LSF has been automatically
canceled.
• You can resume the set speed after the condition that
caused ACC with LSF to cancel improves. Press the
RES/+ button.
2 Adaptive Cruise Control (ACC) with Low Speed
• Flashes when the system senses a likely collision with
a vehicle in front of you.
• Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 494
123
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when ACC with LSF is canceled due to
excessive high vehicle speed.
• Reduce the speed, then reset ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when the speed of the vehicle is too high
for you to set ACC with LSF.
• Reduce the speed, then set ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
with LSF is in operation.
• ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when pressing the SET/– button while the
distance between your vehicle and the vehicle
ahead of you is too close.
• ACC with LSF cannot be set.
124
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears just before the ACC with LSF is
automatically canceled when you are descending a
long hill etc. (The following interval is automatically
set to extra long).
• Appears when the ACC with LSF has been
automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when you are descending a long hill etc.
and you press the RES/+ or SET/– button.
125
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the driver’s seat belt is unfastened
while your vehicle is automatically stopped by ACC
with LSF.
• ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 503
• Appears when pressing the SET/– button while the
driver’s seat belt is unfastened.
• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 503
• Appears when the shift position is changed to any
position other than
(
D while ACC with LSF is in
operation.
• ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 503
• Appears when pressing the SET/– button while the
transmission is in any position other than
(
D.
• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF) P. 503
126
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the vehicle is stopped on a very steep
slope while ACC with LSF is in operation.
• ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the SET/– button while the
vehicle is stopped on a very steep slope.
●
ACC with LSF cannot be set.
127
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the parking brake is applied
automatically while ACC with LSF is in operation.
• ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when pressing the SET/– button while the
parking brake is applied.
• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears when pressing the SET/– button while the
vehicle is moving and the brake pedal is depressed.
• ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
• Appears if ACC with LSF is canceled while your
vehicle is automatically stopped by ACC with LSF.
• Immediately depress the brake pedal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст