Honda Civic. Manual — part 788
Fig. 2: Identifying Air Intake Duct
4. Remove the injector cover.
Fig. 3: Identifying Injector Cover
5. Remove the evaporative emission (EVAP) canister hose (A), brake booster
vacuum hose (B), positive crankcase ventilation (PCV) hose (C), and power
steering (P/S) hose clamp (D).
2008 Honda Civic GX
2006-08 ENGINE Intake Manifold and Exhaust System - Civic (Except Hybrid)
Fig. 4: Identifying Evaporative Emission Canister Hose And Brake
Booster Vacuum Hose
6. Remove the quick-connect fitting cover (A), then disconnect the fuel feed hose
(see FUEL LINE/QUICK-CONNECT FITTING REMOVAL ).
Fig. 5: Identifying Quick-Connect Fitting Cover
7. Remove the engine wire harness connectors and wire harness clamps from the
intake manifold.
Throttle actuator connector
Manifold absolute pressure (MAP) sensor connector
Evaporative emission (EVAP) canister purge valve connector
2008 Honda Civic GX
2006-08 ENGINE Intake Manifold and Exhaust System - Civic (Except Hybrid)
Intake manifold tuning (IMT) valve actuator connector
8. Remove the water bypass hoses, then plug the water bypass hoses.
Fig. 6: Identifying Water Bypass Hoses
9. Remove the throttle body.
Fig. 7: Identifying Throttle Body
10. Remove the heater hose clamp bracket.
2008 Honda Civic GX
2006-08 ENGINE Intake Manifold and Exhaust System - Civic (Except Hybrid)
Fig. 8: Identifying Heater Hose Clamp Bracket
11. Raise the vehicle on the lift to full height.
12. Remove the intake manifold bracket.
Fig. 9: Identifying Intake Manifold Bracket
13. Lower the vehicle on the lift.
14. Remove the all intake manifold mounting bolts and nuts, then remove the
intake manifold from the cylinder head.
2008 Honda Civic GX
2006-08 ENGINE Intake Manifold and Exhaust System - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст