Honda Civic. Manual — part 799

Fig. 1: Locating Interior Trim (2-Door)

4-door

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Interior Trim - Civic (All Except Hybrid)

Fig. 2: Locating Interior Trim (4-Door)

TRIM REMOVAL/INSTALLATION - DOOR AREAS

Special Tools Required

KTC trim tool set SOJATP2014 *

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Interior Trim - Civic (All Except Hybrid)

* Available through the American Honda Tool and Equipment Program; call 888-
424-6857

DOOR SILL AREA - 2-DOOR

1. Driver's side: Remove the front seat belt lower anchor (see step 4 in FRONT

SEAT BELT REPLACEMENT ).

2. Driver's side: Remove the footrest (see step 3 in CARPET

REPLACEMENT ).

3. Driver's side: Remove the front side cap from the door sill trim, and remove the

opener lock cylinder and screw (see TRUNK LID OPENER/FUEL FILL
DOOR OPENER REPLACEMENT ).

4. Detach the hooks (A) and tabs (B) from the kick panel (C) and rear side trim

panel (D), and pull the door sill trim (E) up by hand to detach the clips, then
remove it.

Driver's side

NOTE:

Put on gloves to protect your hands.

Take care not to bend or scratch the trim and panels.

Use the appropriate tool from the KTC trim tool set to
avoid damage when prying components.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Interior Trim - Civic (All Except Hybrid)

Fig. 3: Detaching Hooks And Tabs From Kick Panel And Rear Side Trim
Panel (Driver'S Side)

Passenger's side

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Interior Trim - Civic (All Except Hybrid)