Honda Civic. Manual — part 578
Fig. 58: Identifying Connecting Rod Bolt Tightening Angle
Courtesy of AMERICAN HONDA MOTOR CO., INC.
14. Remove any old liquid gasket from the lower block mating surfaces, bolts, and
bolt holes.
15. Clean, and dry the lower block mating surfaces.
16. Apply liquid gasket, P/N 08717-0004,08718-0001, 08718-0002, 08718-0003,
or 08718-0009, evenly to the engine block mating surface of the lower block.
Fig. 59: Identifying Lower Block Mating Surfaces
Courtesy of AMERICAN HONDA MOTOR CO., INC.
NOTE:
Do not install components if too much time has passed
after applying the liquid gasket (for P/N 08718-0002, no
more than 4 minutes, for all others, no more than 5
minutes). Instead, remove the old residue and reapply
the liquid gasket.
2008 Honda Civic GX
2006-08 ENGINE Engine Block - Civic (Except Hybrid)
17. Put the lower block on the engine block.
Fig. 60: Identifying Lower Block On Engine Block
Courtesy of AMERICAN HONDA MOTOR CO., INC.
18. Apply new engine oil to the threads and flange of the bearing cap bolts.
19. Tighten the bearing cap bolts, in sequence, to 25 N.m (2.5 kgf.m, 18 lbf.ft).
Fig. 61: Identifying Bearing Cap Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
20. Tighten the bearing cap bolts an additional 57 degrees.
2008 Honda Civic GX
2006-08 ENGINE Engine Block - Civic (Except Hybrid)
Fig. 62: Identifying Bearing Cap Bolts Tightening Angle
Courtesy of AMERICAN HONDA MOTOR CO., INC.
21. Tighten the 8 mm bolts, in sequence, to 24 N.m (2.4 kgf.m, 17 lbf-ft).
Fig. 63: Identifying Bearing Cap Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
22. Use the special tools to drive a new oil seal squarely into the engine block to
the specified installed height.
2008 Honda Civic GX
2006-08 ENGINE Engine Block - Civic (Except Hybrid)
Fig. 64: Identifying Special Tool
Courtesy of AMERICAN HONDA MOTOR CO., INC.
23. Measure the distance between the engine block (A) and oil seal (B).
Oil Seal Installed Height: 0.2-1.2 mm (0.001-0.047 in.)
Fig. 65: Identifying Distance Between Engine Block And Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
24. Install the baffle plate (A), then install the oil screen (B) with a new O-ring (C).
2008 Honda Civic GX
2006-08 ENGINE Engine Block - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст