Honda Civic. Manual — part 742

Fig. 40: Identifying Dials And Heater Control Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Install the control panel in the reverse order of removal. After installation,

operate the various functions to make sure they work properly.

4. Run the self-diagnosis function to confirm that there are no problems in the

system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION ).

DUST AND POLLEN FILTER REPLACEMENT

1. Open the glove box. Remove the glove box stop on each side, then let the

glove box hang down (see PASSENGER'S DASHBOARD UNDERCOVER
REMOVAL/INSTALLATION ).

2. Remove the dust and pollen filter assembly (A) from the evaporator.

Fig. 41: Identifying Dust And Pollen Filter Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Remove the filter (A) from the housing (B), and replace the filter.

2008 Honda Civic EX

2006-08 HVAC Heating - Civic (All Except Hybrid)

Fig. 42: Identifying Filter And Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Install the filter in the reverse order of removal. Make sure that there is no air

leaking out of the evaporator.

BLOWER UNIT REMOVAL AND INSTALLATION

1. Remove the glove box (see PASSENGER'S DASHBOARD

UNDERCOVER REMOVAL/INSTALLATION ).

2. Cut the plastic cross brace (A) in the glove box opening with diagonal cutters

in the area shown, and discard it.

Fig. 43: Identifying Plastic Cross Brace
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Remove the bolts and the glove box frame (A).

2008 Honda Civic EX

2006-08 HVAC Heating - Civic (All Except Hybrid)

Fig. 44: Identifying Glove Box Frame
Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Remove the wire harness clip (A), the self-tapping screws, and the passenger's

heater duct (B).

Fig. 45: Identifying Wire Harness Clip And Passenger's Heater Duct
Courtesy of AMERICAN HONDA MOTOR CO., INC.

5. Disconnect the connector (A) from the blower motor. Remove the wire harness

clip (B).

2008 Honda Civic EX

2006-08 HVAC Heating - Civic (All Except Hybrid)

Fig. 46: Identifying Connector And Wire Harness Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.

6. Disconnect the connector (A) from the recirculation control motor. Remove the

self-tapping screws, the bolt, the mounting nuts, and the blower unit (B).

Fig. 47: Identifying Connector And Blower Unit (With Torque
Specifications)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

7. Install the unit in the reverse order of removal. Make sure that there is no air

leakage.

2008 Honda Civic EX

2006-08 HVAC Heating - Civic (All Except Hybrid)