Honda Civic. Manual — part 269
SHIFT LOCK SOLENOID REPLACEMENT
1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL ).
2. Remove the shift lock solenoid connector.
3. Release the shift lock solenoid lock (A), then remove the shift lock solenoid
(B).
Fig. 348: Removing Shift Lock Solenoid Lock
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Replace the shift lock solenoid (A), solenoid plunger (B), and plunger spring
(C) assembly.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 349: Identifying Shift Lock Solenoid, Solenoid Plunger And Plunger
Spring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Apply silicone grease to the tip (D) of the shift lock stop (E), and install a new
shift lock solenoid assembly by aligning the joint of the shift lock solenoid
plunger with the tip of the shift lock stop.
6. Route the shift lock solenoid harness in the guide, and install the connector (F)
on the bracket base.
7. Install the shift lever assembly (see SHIFT LEVER INSTALLATION ).
SHIFT LOCK STOP, SHIFT LOCK STOP CUSHION REPLACEMENT
1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL ).
2. Release the shift lock solenoid lock (A), then remove the shift lock solenoid
(B).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 350: Removing Shift Lock Solenoid Lock
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the shift lock release (A) and release the spring (B).
Fig. 351: Identifying Shift Lock Stop And Stop Cushion
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Remove the shift lock stop (C) and the stop cushion (D), and replace the shift
lock stop or the stop cushion.
5. Install the shift lock stop cushion on the shift lock stop.
6. Apply silicone grease to the pin on the shift lever bracket base, and install the
shift lock stop over the pin.
7. Install the shift lock release spring and the shift lock release, apply silicone
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
grease to the shift lock release mounting tip if necessary.
8. Apply silicone grease to the tip of the shift lock stop, and install the shift lock
solenoid assembly by aligning the joint of the shift lock solenoid plunger with
the tip of the shift lock stop.
9. Route the shift lock solenoid harness in the guide.
10. Install the shift lever assembly (see SHIFT LEVER INSTALLATION ).
PARK PIN SWITCH TEST
1. Remove the center console (see CENTER CONSOLE
REMOVAL/INSTALLATION ).
2. Move the shift lever into P, and check for continuity between park pin
switch/A/T gear position indicator panel light connector terminals No. 3 and
No. 4. There should be no continuity.
Fig. 352: Identifying A/T Gear Position Indicator Panel Light Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Shift out of P, and check for continuity between connector terminals No. 3 and
No. 4. There should be continuity.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст