Honda Civic. Manual — part 657
Fig. 44: Aligning Ledge Portion
2. Compress the damper spring.
3. Install all the parts except the damper mounting washer and self-locking nut
onto the damper unit (A) by referring to the Exploded View.
Fig. 45: Exploded View Of Damper
4. Align the bottom of the spring (B) and the stepped part of the lower spring seat
(C).
5. Align the damper bracket (A) and the damper mounting base (B) so that the
"delta" stamp (C) points toward the front.
Fig. 46: Aligning Angle Of Strut Bolt On Damper Bracket
6. Align the angle of the strut bolt (D) on the damper bracket as shown.
7. Install a new self-locking nut (A).
2008 Honda Civic GX
2006-08 SUSPENSION Front Suspension Civic (All Except Hybrid)
Fig. 47: Identifying Self-Locking Nut (With Torque Specifications)
8. Hold the damper shaft using a hex wrench (B), and tighten the new self-
locking nut using the strut nut adapter (C) to the specified torque value.
9. Install the cap.
2008 Honda Civic GX
2006-08 SUSPENSION Front Suspension Civic (All Except Hybrid)
2006-08 ENGINE PERFORMANCE
Fuel Supply System - Civic GX
COMPONENT LOCATION INDEX
Fig. 1: Identifying Fuel Supply System Components (1 Of 2)
NOTE:
Refer to the FUEL SUPPLY SYSTEM (R18A1) (EXCEPT
HYBRID) article for additional information that is not shown
in this article.
2008 Honda Civic GX
2006-08 ENGINE PERFORMANCE Fuel Supply System - Civic GX
2008 Honda Civic GX
2006-08 ENGINE PERFORMANCE Fuel Supply System - Civic GX
Fig. 2: Identifying Fuel Supply System Components (2 Of 2)
DTC TROUBLESHOOTING
DTC P0181: FUEL TEMPERATURE SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEM
2008 Honda Civic GX
2006-08 ENGINE PERFORMANCE Fuel Supply System - Civic GX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст