Honda Civic. Manual — part 1025

Fig. 112: Installing Rear Seat-Back Cover Of Seat-Back - Split Fold Down
- 2-Door

SEAT-BACK - SPLIT FOLD DOWN - 4-DOOR

1. Remove the seat-back (see SEAT-BACK - SPLIT FOLD DOWN ).
2. Remove these items:

Armrest (see REAR SEAT ARMREST REPLACEMENT )

Head restraint

3. Left seat-back: Remove the screws, then remove the center belt guide (A).

Fig. 113: Removing Center Belt Guide

NOTE:

Take care not to tear the seams or damage the seat
covers.

Put on gloves to protect your hands.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)

4. Left seat-back: Pull out the center portion of the armrest back panel (A) to

release upper edge of the armrest back panel.

Fig. 114: Releasing Upper Edge Of Armrest Back Panel Pulling Out
Center Portion Of Armrest Back Panel

5. Left seat-back: Pull out the armrest back panel (A) to release the hook (B) from

the seat-back frame and hook (C) from the seat-back cover.

Fig. 115: Releasing Hook From Seat-Back Frame And Hook From Seat-
Back Cover

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)

6. Release the lower hook (A), and clips (B, C).

Fig. 116: Releasing Lower Hook And Clips

7. Pull back the seat-back cover (A), then release the hook strips (B).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)

Fig. 117: Releasing Hook Strips Pulling Back Seat-Back Cover

8. Pull out the seat-back frame (A) from the pad (B), then pull out the head

restraint guides (C) while pinching the end of the guides, and remove them.
The left seat-back is shown; the right seat-back is similar.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Seats - Civic (Except Hybrid)