Honda Civic. Manual — part 432
Fig. 87: Checking For Water Leaks (With Specifications)
8. Attach the plastic cover making sure it is sealed around its outside perimeter to
seal out water. Recheck for water leaks, then install the door panel
2-door (see 2-door )
4-door front door (see 4-door )
4-door rear door (see 4-door )
FRONT AND REAR DOOR POSITION ADJUSTMENT
1. Place the vehicle on a firm, level surface when adjusting the doors.
2. Adjust at the hinges (A):
Pad a floor jack (B) with shop towels (C), then use the jack to support the
door to prevent damage to the door while adjusting it.
On the front door: Remove the front inner fender, 2-door (see FRONT
INNER FENDER REPLACEMENT ), 4-door (see 4-DOOR ). Loosen
the hinge mounting bolts (D) slightly, and move the door backward or
forward, up or down as necessary to equalize the gaps.
NOTE:
Check for a flush fit with the body, then check for equal
gaps between the front, rear, and bottom door edges and
the body. Check that the door and body edges are parallel.
Before adjusting, replace the mounting bolts.
2008 Honda Civic LX
2006-08 ACCESSORIES & EQUIPMENT Doors - Civic (All Except Hybrid)
On the rear door: Loosen the hinge mounting bolts (E) slightly, and move
the door backward or forward, up or down as necessary to equalize the
gaps.
Attach the plastic cover making sure it is sealed around its outside
perimeter to seal out water. Recheck for water leaks, then install the door
panel.
2008 Honda Civic LX
2006-08 ACCESSORIES & EQUIPMENT Doors - Civic (All Except Hybrid)
Fig. 88: Adjusting Front And Rear Door Hinges (With Specifications)
3. If necessary, replace the door mounting bolts with the adjusting bolts (P/N
2008 Honda Civic LX
2006-08 ACCESSORIES & EQUIPMENT Doors - Civic (All Except Hybrid)
90102-SFA-305) made specifically for door adjustment, then adjust at the
door: Loosen the door mounting bolts (F) slightly, and move the door up or
down as necessary to equalize the gaps, and move it in or out until it's flush
with the body.
4. Check that the door and body edges are parallel. If necessary, adjust the door
cushions (A) to make the rear of the doors flush with the body.
Fig. 89: Adjusting Door Cushions
5. Apply touch-up paint to the hinge mounting bolts, and around the hinges.
6. Check for water leaks (see step 7 in FRONT AND REAR DOOR GLASS
ADJUSTMENT ).
FRONT AND REAR DOOR STRIKER ADJUSTMENT
Make sure the door latches securely without slamming it. If necessary, adjust the
striker (A): The striker nuts are fixed, but the striker can be adjusted slightly up or
down, and in or out.
1. Loosen the screws (B).
2008 Honda Civic LX
2006-08 ACCESSORIES & EQUIPMENT Doors - Civic (All Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст