Honda Civic. Manual — part 20

Fig. 41: Disconnecting Wheel Sensor Connector (With Specifications)

2. Remove the clips, the bolt, and the wheel sensor (C).
3. Install the wheel sensor in the reverse order of removal, and note these items:

Apply multipurpose grease to the O-ring (D).

Install the sensor carefully to avoid twisting the wires.

If the wheel sensor comes in contact with the hub bearing unit, it is faulty.

4. Start the engine, and check that the ABS indicator goes off.
5. Test-drive the vehicle, and check that the ABS indicator does not come on.

2008 Honda Civic GX

2006-08 BRAKES ABS System - Civic (All Except Hybrid)

2006-08 RESTRAINTS

SRS (Supplemental Restraint System) - Civic (Except Hybrid)

COMPONENT LOCATION INDEX

4-door

Fig. 1: Identifying Supplemental Restraint System Component Location 4-
Door (1 Of 2)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2008 Honda Civic EX

2006-08 RESTRAINTS SRS (Supplemental Restraint System) - Civic (Except Hybrid)

2008 Honda Civic EX

2006-08 RESTRAINTS SRS (Supplemental Restraint System) - Civic (Except Hybrid)

Fig. 2: Identifying Supplemental Restraint System Component Location 4-
Door (2 Of 2)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2-door

2008 Honda Civic EX

2006-08 RESTRAINTS SRS (Supplemental Restraint System) - Civic (Except Hybrid)

Fig. 3: Identifying Supplemental Restraint System Component Location 2-
Door (1 Of 2)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2008 Honda Civic EX

2006-08 RESTRAINTS SRS (Supplemental Restraint System) - Civic (Except Hybrid)